Alpolic FR Wall Panels are aluminum composite wall panels manufactured in two nominal thicknesses: 4 mm and 6 mm (0.16 and 0.23 in. respectively). The panels consist of two nominally 0.020 in. thick (0.5 mm) aluminum skins bonded to both surfaces of a polyethylene based core (nominal density of 93 pcf) that contains inorganic fillers. The panel skins have a factory applied painted finish. The nominal thickness of the core material is 0.118 in. (3 mm) for the 4 mm thick wall panels and 0.197 (5.0 mm) for the 6 mm thick wall panels. The wall panels are available in widths from 30 in. (762 mm) to 62 in. (1575 mm). Lengths are available from 4 ft. (1219 mm) to 24 ft. (7315 mm). Installation details and product specifications are available within this listing specification.
ALPOLIC® PE Exterior and Interior Wall Panels are sandwich panels which are manufactured in 3, 4, and 6 mm thicknesses. The panels consist of 2 aluminum skins laminated to both sides of a polyethylene core. Between each aluminum skin and the core, there is a 0.0381 mm thick “Dry Laminating Film” to facilitate the lamination process. The PE panels are designated as ALPOLIC® AP, ALPOLIC® AT or ALPOLIC® AN. ALPOLIC® AP panels have 0.5mm thick aluminum for the front and back skins, ALPOLIC® AT panels have 0.5mm thick aluminum for the front skin and 0.3mm thick aluminum for the back skin, and ALPOLIC® AN are anodized and have 0.5 mm thick aluminum for the front and back skins.
RATINGS
| ASTM E84 – Surface Burning Characteristics |
| PRODUCT |
FLAME SPREAD INDEX |
SMOKE DEVELOP INDEX |
| 4 mm Alpolic® FR Panels |
< 25 |
< 450 |
| 6 mm Alpolic® FR Panels |
< 25 |
< 450 |
| 3 mm Alpolic® PE Panels |
< 25 |
< 450 |
| 4 mm Alpolic® PE Panels |
< 25 |
< 450 |
| 6 mm Alpolic® PE Panels |
< 25 |
< 450 |
| CAN/ULC S102 – Surface Burning Characteristics |
| PRODUCT |
FLAME SPREAD INDEX |
SMOKE DEVELOP INDEX |
| 4 mm Alpolic® FR Panels |
< 25 |
< 450 |
| 6 mm Alpolic® FR Panels |
< 25 |
< 450 |
| 3 mm Alpolic® PE Panels |
< 25 |
< 450 |
| 4 mm Alpolic® PE Panels |
< 25 |
< 450 |
| 6 mm Alpolic® PE Panels |
< 25 |
< 450 |
| PRODUCT |
STANDARD |
RATING |
DESIGN LISTING |
| 4 and 6 mm Alpolic® FR Panels |
ASTM E119 |
One-hour, non-load bearing |
MCA-CWP 60-01 |
| ASTM E119 |
Two-hour, non-load bearing |
MCA-CWP 120-01 |
| NFPA 285 |
Met the conditions of acceptance |
MCA-CWP 30-01 |
| CAN/ULC S134 |
Met the conditions of acceptance |
MCA-CWP 25-01
MCA-CWP 25-02 |
Alpolic panels are also under Intertek’s QA program for the following evaluation reports:
| Product |
Product Approval No. |
| Alpolic® FR Panels |
ESR-2653 |
| ALPOLIC® PE Panels |
ESR-3704 |
FLORIDA PRODCUT APPROVAL
| Product |
Product Approval No. |
| Alpolic and Alpolic/FR - Composite Wall Panel Systems |
FL No. 10520 |
| ALPOLIC /ALPOLIC fr using the ACCU-TRACR SYSTEM by Altech Panel Systems,L.L.C. |
FL No. 12087 |
| Alpolic and Alpolic/FR Aluminum Composite Wall Panel Systems - Series 44 |
FL No. 17186 |
| Alpolic and Alpolic/FR Aluminum Composite Wall Panel Systems - Series 20 |
FL No. 17186 |
