SAFTI FIRST SuperLite I Tempered Glass Panel 20/30 Minute
Company: SAFTI FIRST
GLAZING/GLASS
SuperLite I, 1/4" to 1/2" thick, Tempered Glass Panel for use in Fire Windows, Door Lights and Door Side Lights in 20/30 Minute locations without Hose Stream, in listed Wood, Aluminum or Steel Frames, in Steel, Aluminum or Wood-Faced Doors, and Wood or Steel Window Frames.
Limitations
Requires 1/4" clearance between inside edge of frame and edges of glazing. Listed for US market only.
Must be rated assemblies.
Wood Door and Wood Frame assemblies require edge sealing/intumescent per door manufacturers requirements.
Maximum Sizes and Applications:
| Superlite I - 1/4" - 1/2" |
| Rating: |
Application: |
Max Area (in²): |
Max W (in.): |
Max H (in.): |
Stop Height (in.): |
| 20 Minute |
Steel Door |
3341 |
35-1/8 |
95-1/8 |
5/8 |
| Wood Door |
3299 |
36-1/8 |
91-5/16 |
5/8 |
| AL Door |
3436 |
36-3/4 |
95-1/2 |
5/8 |
| Steel Sidelite/Transom |
5760 |
96 |
95-1/2 |
5/8 |
| Steel Sidelite/Transom |
3965 |
48-1/4 |
109 |
5/8 |
| Wood Sidelite/Transom |
5760 |
96 |
95-1/2 |
5/8 |
| AL Sidelite/Transom |
5760 |
96 |
95-1/2 |
5/8 |
| 30 Minute |
Steel Window |
5760 |
96 |
95-1/2 |
5/8 |
Manufacturer's Instructions
Listed maximum sizes of glazing are based on sizes tested and may exceed those allowed by local codes. Dependent on the end use installation, local codes may require that additional criteria be met to address considerations such as radiant heat hazards and impact safety. Under such circumstances, the prior approval of the Authority Having Jurisdiction must be obtained unless conformance to relevant additonal requirements is indicated within the individual listing. Clearance between the edges of the glazing and the inside edge of the frame shall not exceed 1/4" unless otherwise noted in the individual listing or the manufacturer's installation instructions.
All glazing is identified by an etched mark or label bearing the ETL Mark.
