Steel-Faced (Polyurethane Core) (Flush or Embossed Panel) Swinging Door for installation in 90 minute (1-1/2 hour) locations. For use in Steel frames meeting ANSI-A155.1/UL-63 or as per frame manufacturer's listing(s). A field applied edge seal system is required.
Test Standards:
Positive and Neutral Pressure: UL 10(c), UL 10(b), NFPA 252, and CAN-S104
Limitations*
Cylindrical Latches with maximum 2-3/4" backset / Surface Mounted Vertical Rod Fire Exit Devices / Rim Type Fire Exit Devices / Deadbolts / Surface Mounted Closers / Surface Mounted Protection Plates / Viewers / Glass Lights - Maximum 100 sq.in. / Louvers - Maximum 100 sq. in., below 40 in. high / Door Bottoms - Surface Mounted or Snap-in Design.
Maximum Sizes
Single Swing 3'0" wide x 6'8" high (wood/composite rail construction)
Single Swing 3'0" wide x 8'0" high (metal top rail construction)
Standard Pairs 6'0" wide x 6'8" high (wood/composite rail construction)
Standard Pairs 6'0" wide x 8'0" high (metal rail construction)
Double Egress Pairs N/A
*Category B doors are eligible to bear the "S" (for smoke and draft control) if a listed Category H - smoke and draft control gasket has been applied to the assembly. Please refer to individual gasket manufacturer's listings.
