Extruded Aluminum Door Frame (Fastrak II or Solution II) for installation in 20 minute locations with hose stream or without hose stream in steel/wood stud drywall openings using a field-applied edge-sealing system. Refer to manufacturer's installation instructions for edge-sealing requirements.
Limitations: A positive-pressure fire-rated category "A" door or category "B" door with category "G" edge-sealing system. Minimum wall thickness 3-1/2". 3-point latching may be used for standard pairs only in 20 minute location without hose streams.
|
Configuration |
Maximum Size |
| Single swing |
4'0" wide x 9'0" high |
| Standard Pairs |
8'0" wide x 9'0" high |
Testing Standards: UBC 7-2-97/UL-10C (Positive Pressure).
Evaluated to the following:
This category includes frames not based on ANSI-A155.1/UL-63 construction Type (such as aluminum, wood, light gauge steel, composite, etc.). These listings will reference specific door types for which each frame is qualified. All frames listed in this section may be used in positive pressure assemblies per the terms and limitations of the individual listing.
All frames in this category are identified by a label or marking bearing the wording, "Listed Fire Door Frame", the Warnock Hersey Certification Mark, "UBC-7-2-97/UL-10C. Frames rated at less than 3 hours will have a time interval noted on the label/marking. See Positive Pressure Section Header for more information.
