PRODUCT DESCRIPTION
| Product |
Solid Fuel Factory Built Fireplaces |
| Brand Name |
Fire Rock |
| Description |
The Conventional and Linear Series fireplaces are constructed from several precast concrete blocks of various shapes and sizes. The blocks are assembled with the Fire Rock mortar according to the instruction manual. The firebox is then lined on the sides, bottom, and back with traditional firebrick. The formula for the construction of the precast concrete is held by the manufacturer and is reviewed by the regional Intertek inspector for accuracy.
These fireplaces are approved for use with Ciment Fondu and Secar 41 refractory cements for all construction components. Refractory comprised of Ciment Fondu with 25% recycled refractory material added can be used for the smoke chamber components only. |
| Models |
Conventional 60 and 72, Linear 60 and 72 |
| Model Similarity |
The two models (60 and 72) use all the same materials other than the base, firebox back, and the front and back panels of the smoke chamber, which are larger sections in respect to their size.
Additional models include the Linear Series fireplaces with three tiers of side and back blocks. The 60" and 72" widths are included in the Linear Series. |
| Ratings |
None |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| FIREPLACE CLEARANCES (inside enclosure) – Conventional Series |
| Firebox and smoke chamber to backwall (in) |
1.0 |
| Smoke chamber top to framing (in) |
1.0 |
| Firebox and smoke chamber to sidewall (in) |
1.0 |
| Smoke chamber to front wall (in) |
1.0 |
| Chimney to joists or chase (in) |
0.0 |
| FIREPLACE CLEARANCES (exposed surfaces) – Conventional Series |
| Fireplace opening to sidewalls (in) |
28.0 |
| Combustible trim around/above opening (in) |
12.0 |
| Firebox opening to 8-in mantle (in) |
16.0 |
| Smoke chamber top to framing (in) |
1.0 |
| FIREPLACE CLEARANCES (inside enclosure) – Linear Series |
| Firebox and smoke chamber to backwall (in) |
1.0 |
| Smoke chamber top to framing (in) |
1.0 |
| Firebox and smoke chamber to sidewall (in) |
1.0 |
| Smoke chamber to front wall (in) |
1.0 |
| Chimney to joists or chase (in) |
0.0 |
| FIREPLACE CLEARANCES (exposed surfaces) – Linear Series |
| Fireplace opening to sidewalls (in) |
32.0 |
| Fireplace opening to facewall (in) |
12.0 |
FLOORING REQUIREMENTS
Non-combustible flooring must follow the requirements below for the respective fireplace sizes. The hearth extension must extend 8-in beyond each side of the fireplace opening.
32-inches opening height – 20-inch non-combustible hearth extension plus 36-inches of floor protection extending from the hearth extension
42 5/8-inches opening height – 20-inch non-combustible hearth extension plus 48-inches of floor protection extending from hearth extension
49 1/4-inches opening height – 20-inch non-combustible hearth extension plus 60-inches of floor protection extending from hearth extension
All floor protection must have a minimum R-value of 0.30.
Linear hearth extension: A non-combustible hearth extension must be 32-in from the face of the fireplace when the hearth extension is level with the floor of the fireplace. The hearth extension can be reduced to 20-in only when the hearth extension is raised 12-in or more above the combustible floor in front of the 20-in hearth extension.
| VENTING |
| Vent Type |
Two - Fire Rock Chimney or UL 103 HT listed |
| Vent Size |
15-in dia |
| Max. Vertical Length |
65-ft |
| Min. Vertical Length |
15-ft |
| Max. Horizontal offset |
40-in |
| Max. Number of Elbows |
2 - 30° |
