Mineral Core Type Swinging Flush Design Fire Door with Inlay Moulding for installation singly or in pairs in up to 60 minutes. For use in any Category C Standard Frame.
Limitations:
Cylindrical with 2-3/4" Backset / Surface Bolts / Surface Mounted Vertical Rod Fire Exit Hardware / Surface Mounted Closer / Automatic Door Bottoms / Viewer / Temperature Rise 250°F at 30 minutes.
| Configuration |
Maximum Size* |
| Single |
4' 0" wide x 8' 0" high |
| Pairs |
8' 0" wide x 8' 0" high |
| Double Egress |
N/A |
*See manufacturer's installation instructions for additional information, restrictions and limitations.
Testing Standards: UBC-7-2-97/UL-10C (Positive Pressure).
Evaluated to the following...
This category includes doors evaluated with an edge-sealing system (Category G) field-applied to the labeled frame or door. The application of the edge-sealing system does not require any machining of the frame or door. Please refer to "Category G - Edge-Sealing System" for individual manufacturer's listings.
These assemblies are eligible for use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in the accordance with the frame manufacturer's individual listing.
All doors listed in Category B are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
All doors in this category are identified by a label or marking bearing the wording, "Listed Fire Door", a time interval, a temperature rise rating, a serial number and the Warnock Hersey Certification Mark and "UBC-7-2-97/UL 10C".
