Wood Door Frame (Veneer-Wrapped) (Particle Board) (Knock-Down) with or without Side Light Panel for installation in 20 minute locations in steel/wood stud drywall or masonry openings.
Maximum Size of Openings
Frame Only: Singles - 4'0" wide x 8'0" high
Frame Only: Pairs - 8'0" wide x 8'0" high
Frames with Side Light/Side Panel Assembly
12'5" wide x 8'0" high
Minimum Wall Thickness
3-3/4"
Evaluated to the following...
Unless otherwise noted, assemblies in this section have been tested to the following standards:
ASTM-E152, Methods of Fire Tests of Door Assemblies;
CAN4-S104(ULC-S104), Standard Method for Fire Tests of Door Assemblies;
CSFM-43.7, Methods of Fire Tests of Door Assemblies;
NFPA-252, Standard Methods of Fire Tests of Door Assemblies;
UBC-7-2-94, Uniform Building Code;
UL-10(b), Fire Tests of Door Assemblies;
and are installed, unless otherwise noted, in accordance with the following:
NFPA-80, Fire Doors & Windows.
Manufacturer's Instructions.
Listed maximum sizes of lights are based on sizes tested and may exceed local code requirements.
All frames are identified by either a label or embossed marking bearing the wording "Listed (Product)" and the WHI Certification Mark. Frames rated for less than 3 hours also bear the time interval. Frame labels that do not include a time interval are rated for 3 hours.
