PRODUCT COVERED
Lynden Door 45 Min Composite Wood Fire Door
PRODUCT DESCRIPTION
Composite wood fire door, for installation singly in 45 minute locations. For use in any Category C – Standard Frame. These doors may also be installed in frames listed in Category C – Proprietary Frames, in accordance with the frame manufacturer's individual listing.
Maximum Sizes:
|
Single-Swing
|
4'0" x 8'0"
|
|
Pairs
|
Not Allowed
|
Allowed Hardware:
· Cylindrical latches with minimum 1/2 in. bolt throw and up to 2-3/4 in. backset
· Cylindrical deadbolts
· Mortise latch and deadbolts
· Surface applied hardware
· Viewers
· Surface applied hardware kick plates
· Card reader
· Rim panic
RATINGS
45 Minute Fire Door – Single Swing – Positive Pressure – With Hose-Stream
EVALUATED TO THE FOLLOWING:
CATEGORY A – FIRE DOORS
This category includes doors evaluated without an edge-sealing system between the door and frame. It also includes doors evaluated with a sealing system incorporated (concealed or visible) into the edge of the door by the licensed manufacturer or machining distributor.
Meeting edges of pairs may require an astragal or an edge-sealing system. Please refer to individual door listings.
These doors are eligible for use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in the accordance with the frame manufacturer's individual listing.
All doors listed in Category A are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
All doors in this category are identified by a label or marking bearing the wording, "Listed Fire Door", a time interval, a temperature rise rating, a serial number and the Warnock Hersey Certification Mark and "UBC-7-2-97/UL-10C & CAN 4S104".
