PRODUCT DESCRIPTION
| Product |
Solid Fuel Factory Built Fireplaces |
| Brand Name |
Fire Rock |
| Description |
This product is identical to model Fire Rock Conventional Series Fireplace 30, 36, and 42, however it is for outdoor use only. The assembly is built on a structurally adequate non-combustible base. The units consist of interlocking pre-cast parts which fit together using a temperature resistant mortar supplied with the units. The system includes all parts necessary for the assembly of a complete firebox, smoke dome, and chimney assembly.
The parts of the system are cast using a mixture consisting predominantly of expanded clay aggregate. Each piece is designed for a specific part of the fireplace such that only one means for complete assembly is possible. An expanded clay aggregate top plate is installed at the smoke dome top, and either supports the Fire Rock chimney blocks or may be fitted with an adapter for installing a listed factory-built chimney. The fire chamber is lined with firebrick that is minimum of 1-1/4-in thick on all sides. The Listed Outdoor Masonry Fireplace System
Model Outdoor Series Fireplace 30, 36, and 42 have been approved to UL 127. These models have also been approved for a cored back wall option.
LIV-LITE chimney system will be used on the models 30, 36, and 42 fireplaces. |
| Models |
Outdoor 30, 36, 42 |
| Model Similarity |
All models use the same materials other than the base, firebox back, and the front and back panels of the smoke chamber, which are larger sections in respect to their size. |
| Ratings |
None |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| MINIMUM CLEARANCES TO COMBUSTIBLE CONSTRUCTION |
| |
| Unit to Enclosure side wall |
1-in (25.4mm) |
| Unit to Enclosure back wall |
1-in (25.4mm) |
| Unit to Enclosure Face |
1-in (25.4mm) |
| Unit to Enclosure Top |
1-in (25.4mm) |
| Opening to combustible Side Wall |
28-in (711mm) |
| Opening to combustible Mantle |
16-in (406mm) |
FLOORING REQUIREMENTS
Hearth extension: A non-combustible hearth extension must be 30-in from the face of the fireplace when the hearth extension is level with the floor of the fireplace. The hearth extension can be reduced to 20-in only when the hearth extension is raised 10-in or more above the combustible floor in front of the 20-in hearth extension.
| VENTING |
| Vent Type |
Fire Rock Chimney or UL 103 HT listed |
| Vent Size |
15-in dia |
| Max. Vertical Length |
12-ft |
| Min. Vertical Length |
2-ft (30 & 36), 3-ft (42) |
| Max. Horizontal offset |
40-in |
| Max. Number of Elbows |
2 - 30° |
