PRODUCT DESCRIPTION
| Product |
Solid Fuel Factory Built Fireplaces |
| Brand Name |
Fire Rock |
| Description |
The See-Thru Series fireplaces are constructed from several precast concrete blocks of various shapes and sizes. The blocks are assembled with the Fire Rock mortar according to the instruction manual. The firebox is then lined on the sides and bottom with traditional firebrick. The formula for the construction of the precast concrete is held by the manufacturer and is reviewed by the regional Intertek inspector for accuracy.
These fireplaces are approved for use with Ciment Fondu and Secar 41 refractory cements for all construction components. Refractory comprised of Ciment Fondu with 25% recycled refractory material added can be used for the smoke chamber components only. |
| Models |
See-Thru 30, 36, 42, 48 |
| Model Similarity |
All models use all the same materials other than the base and the front and back panels of the smoke chamber, which are larger sections in respect to their size.
The Lite-Rock installation consists of two 1.5-in thick layers of Skamotec 225 insulation board placed directly beneath the base plate of the fireplace. This will allow the fireplace to be installed onto a combustible floor.
LIV-LITE chimney system will be used on models 30, 36, 42, and 48 See-Thru Fireplaces. |
| Ratings |
None |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| FIREPLACE CLEARANCES (inside enclosure) |
| Smoke chamber top to framing (in) |
1.0 |
| Firebox and smoke chamber to sidewall (in) |
1.0 |
| Smoke chamber to front wall (in) |
1.0 |
| Chimney to joists or chase (in) |
0.0 |
| FIREPLACE CLEARANCES (exposed surfaces) |
| Fireplace opening to sidewalls (in) |
28.0 |
| Combustible trim around/above opening (in) |
12.0 |
| Firebox opening to 8-in mantle (in) |
30.0 |
FLOORING REQUIREMENTS
Non-combustible flooring must extend 20-in from the fireplace opening an extend 8-in beyond each side of the fireplace opening.
