DOORS
Simulated Panel Type (Proprietary Construction), Fire Door for installation in single swing 20 minute locations.
Limitations
Cylindrical Latches with up to a 2-3/4" Backset/Deadbolts (including interconnected latch and deadbolt assemblies)/Viewers/4" x 0.097" Hinges.
Maximum Size of Openings
Single Swing 4’0” wide x 9’0 high
Note:
For additional information for all locations, please refer to the G-P Gypsum Corp., Weyerhaeuser Co. listings; Weyerhaeuser - Composite Products Division for Indiana and Pennsylvania locations. For Pennsylvania location only, please refer to the Jeld-Wen of Oregon listing.
Evaluated to the following...
Unless otherwise noted, assemblies in this section have been evaluated for conformance to the following standards:
ASTM-E152, Methods of Fire Tests of Door Assemblies
CSFM-43.7, Methods of Fire Tests of Door Assemblies
CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies
NFPA-252, Standard Methods for Fire Tests of Door Assemblies
UBC-7-2-94, Uniform Building Code
UL-10(b), Fire Tests of Door Assemblies
and are installed in accordance with the following:
NFPA-80, Fire Doors and Windows
Manufacturer's Instructions.
All assemblies are identified by a label or marking bearing the wording, "Listed (Product)", a time interval, temperature rise (if applicable), a serial number and the WHI Certification Mark.
(Unless otherwise specified, all Fire Doors have a nominal thickness of 1-3/4".)
