Hollow Metal Type (14 gauge) (Steel-Faced), Swinging Flush Design Door and Pressed Steel (Welded Up) (14, 12, 10 gauge) Door Frame for Single Swing installation in Small Arms Super Power Resistant locations.
Limitations: Latches and/or Light Frames must comply with UL 752 (Doors may be prepared for, and glazing installed, only at the factory).
| Maximum Size of Opening: |
Single Swing: No Restriction. |
Hollow Metal Type (14 gauge) (Steel-Faced) (Vertically-Stiffened) (Insulated), Swinging Flush Design Door and Pressed Steel (Welded Up) (14, 12, 10 gauge) Door Frame for Single Swing installation in Small Arms Super Power Resistant locations.
Limitations: Latches and/or Light Frames must comply with UL 752 (Doors may be prepared for, and glazing installed, only at the factory).
| Maximum Size of Opening: |
Single Swing: No Restriction. |
Pressed Steel (Welded Up) (14, 12, 10 gauge) Window Frame for installation in Small Arms Super Power Resistant locations.
Limitations: Glazing must be listed for compliance with UL 752 for the same level as the frame.
Evaluated to the following:
Unless otherwise noted, assemblies in this section have been tested in accordance with the following standard: UL-752, Bullet Resisting Equipment, and are installed, unless otherwise noted, in accordance with the following: HMMA-863-37. Assemblies are identified by a label or marking bearing the WH Certification Mark and the wording, "Listed (Bullet or Forced Entry) Resistant (Product)", a serial number and one of the following ratings: 1. Small Arms - Medium Power 2. Small Arms - High Power 3. Small Arms - Super Power.
