Intertek Directory of Building Products

MBTechnology Combustible Roofing Deck AC-5 Company: MBTechnology

Assembly No. MBTechnology AC-05
Slope: Unlimted
Deck Type: Combustible Deck
1. Optional Insulations: Minimum 1/2” thick, glass fiber, wood fiber, phenolic, perlite, or polyisocyanurate, NOTE: When EPS insulation is applied over a metal or combustible deck, a thermal barrier complying with section 2603.4.1.5 or applicable current section of the IBC is required.
2. 1- or more Plies Layflat SBS LF25, Layfast SBS TU35, Layflat SBS LF40, Layfast SBS TU43,  Layflat SBS LF60, Layfast SBS TU70; mechanically fastened or fully adhered with ASTM D312 roofing asphalt, hot mopped, or ASTM D3019 cold process adhesive.
3. Optional: 1-Ply Superflex SBS SF160PSA fully adhered with ASTM D312 roofing asphalt, hot mopped or Fastorch SBS FT160CSA , SBS FT120PSA, SBS FT120 GSA, heat fused (torch welded).
4. 1-Ply Metalflex SBS MF160WAL, Metalflex SBS MF160WAL-CoolWhite24; fully adhered with ASTM D312 roofing asphalt or torch welded.
Note: The component materials of each system must be applied in the order in which they are listed above.
 
Evaluated to the following:
The roof covering systems in this section have been evaluated for external fire resistance Classifications A, B, C as outlined by the following test methods:
 
  • ASTM-E108 - American Society for Testing & Materials 'Standard Methods of Fire Test of Roof Covering'
  • ULC-S107 - Underwriters' Laboratories of Canada 'Standard Method of Tests for Fire Resistance of Roof Covering Materials'
  • UL-790 - Underwriters' Laboratories Inc. 'Tests for Fire Resistance of Roof Covering Materials'
Each system listing identifies the deck substrate as either non-combustible or combustible. Systems evaluated for combustible decks will provide the same ratings when applied over non-combustible decks. Unless otherwise noted in individual listings, combustible decks shall be sheathed with a minimum 15/32" veneer plywood or minimum 7/16" non-veneer APA rated sheathing panel (oriented strand board panels, structural particleboard panels, composite panels or wafer-board panels) or 3/4" thick solid wood sheathing boards. The component materials of each system must be applied in the order in which they are listed. All components of the system must be listed for external fire exposure by an agency acceptable to the AHJ.

Some Roof Covering Systems have been evaluated for other performance characteristics, in addition to external fire exposure. Where applicable, such additional performance characteristics are noted within the specific listing.

In all cases, manufacturer's instructions should be consulted for installation procedures and details not covered by these listings.

Listed Materials are identified by a label or marking bearing the wording, "Listed Roofing Component", a reference number or code and the WHI Certification Mark. 
Listing Report Return to Search
Attributes
CriteriaUL 790 (2004)
CriteriaASTM E108 (2011)
CriteriaASTM E108 (2017)
CriteriaCAN / ULC S107 2010 Ed. 3 (R2016)
CSI Code07 50 00 Membrane Roofing
Listing SectionROOF COVERING SYSTEMS
Roofing: Deck TypeCombustible
Roofing: Fire RatingClass A
Roofing: Maximum SlopeUnlimited
Spec ID28731
Design Documents
No Results
Public Documents
No Results
Intertek WH Mark Warnock Hersey Mark

Intertek ETL Mark ETL Listed Mark
Intertek
© Intertek Group plc
All other product or service names are the property of their respective owners.
Total Quality. Assured.