Intertek Directory of Building Products

MBTechnology Combustible Roofing Deck AC-9 Company: MBTechnology

Assembly No. MBTechnology AC-09
Slope: Maximum ½:12
Deck Type: Combustible Deck
1. 1-Ply Layflat SBS LF60, or Layfast SBS TU70  mechanically fastened.
2. 1-Ply Layflat SBS LF60, or Layfast SBS TU70 ; fully adhered with ASTM D312 roofing asphalt, hot mopped.
3. 1-Ply Superflex SBS SF160PSA cap sheet; SBS FT 160CSA,  SBS120PSA, and SBSFT120 GSA fully adhered with ASTM D312 roofing asphalt, hot mopped or torch/heat welded.
4. Surfacing: Roofing gravel ballast applied at a minimum coverage rate of 400 lbs./sq.
Note: The component materials of each system must be applied in the order in which they are listed above.
 
Evaluated to the following:
The roof covering systems in this section have been evaluated for external fire resistance Classifications A, B, C as outlined by the following test methods:
 
  • ASTM-E108 - American Society for Testing & Materials 'Standard Methods of Fire Test of Roof Covering'
  • CAN/ULC-S107 - Underwriters' Laboratories of Canada 'Standard Method of Tests for Fire Resistance of Roof Covering Materials'
  • UL-790 - Underwriters' Laboratories Inc. 'Tests for Fire Resistance of Roof Covering Materials'
Each system listing identifies the deck substrate as either non-combustible or combustible. Systems evaluated for combustible decks will provide the same ratings when applied over non-combustible decks. Unless otherwise noted in individual listings, combustible decks shall be sheathed with a minimum 15/32" veneer plywood or minimum 7/16" non-veneer APA rated sheathing panel (oriented strand board panels, structural particleboard panels, composite panels or wafer-board panels) or 3/4" thick solid wood sheathing boards. The component materials of each system must be applied in the order in which they are listed. All components of the system must be listed for external fire exposure by an agency acceptable to the AHJ.

Some Roof Covering Systems have been evaluated for other performance characteristics, in addition to external fire exposure. Where applicable, such additional performance characteristics are noted within the specific listing.

In all cases, manufacturer's instructions should be consulted for installation procedures and details not covered by these listings.

Listed Materials are identified by a label or marking bearing the wording, "Listed Roofing Component", a reference number or code and the WHI Certification Mark. 
Listing Report Return to Search
Attributes
CriteriaUL 790 (2004)
CriteriaASTM E108 (2011)
CriteriaASTM E108 (2017)
CriteriaCAN / ULC S107 2010 Ed. 3 (R2016)
CSI Code07 50 00 Membrane Roofing
Listing SectionROOF COVERING SYSTEMS
Roofing: Deck TypeCombustible
Roofing: Fire RatingClass A
Roofing: Maximum Slope1/2:12
Spec ID28890
Design Documents
No Results
Public Documents
No Results
Intertek WH Mark Warnock Hersey Mark

Intertek ETL Mark ETL Listed Mark
Intertek
© Intertek Group plc
All other product or service names are the property of their respective owners.
Total Quality. Assured.