PRODUCT DESCRIPTION
| Product |
Solid Fuel Fireplace Insert |
| Brand Name |
Fireplace Xtrordinair |
| Description |
The Medium Flush Wood Insert is designed for installation in a masonry fireplace or a factory-built zero clearance fireplace. The unit has overall dimensions of approximately 21.5” (547 mm) high, 28.875” (734 mm) wide and 21.75” (553 mm) length. |
| Models |
Medium Flush Wood Insert |
| Model Similarity |
None |
| Ratings |
115V, 60Hz, 1.8A |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| CLEARANCES |
| Sidewall (in/mm) |
9/229 |
| Side façade (non-combustible facing material) (in/mm) |
9/229 |
| Top façade (non-combustible facing material) (in/mm) |
39/991 |
| Mantle (in/mm) |
41.5/1055 |
| Front (in/mm) |
36/915 |
FLOOR PROTECTION REQUIREMENTS
A non-combustible protective cover must be placed a minimum of 16-in (407 mm) (US) or 18-in (458 mm) (CAN) from the front and 8-in (204 mm) beyond both sides for the fueling door.
Masonry fireplace requirements:
Unit can be placed in a masonry fireplace with a clay liner or a stainless steel liner (positive connection)
Minimum chimney height – 15-ft, maximum chimney height – 33-ft
Masonry fireplace and chimney must meet local building requirements
Zero-Clearance fireplace requirements:
Unit can only be installed into the following fireplace manufacturers – Marco, Majestic, Heatilator, Preway, Tempco, Superior, Heat-N-Glo, Lennox, Martin, Monesson.
Fireplace and chimney must meet local building requirements.
Damper and grate must be removed from fireplace. Smoke shelf, baffles, screen, and doors may be removed if necessary. Chimney liner, insulation, or any structural components of the fireplace cannot be removed or altered to fit the unit.
