Lorient HP450 Edge Seal System for use in up to 90 minute rated assemblies around the perimeter of the door attached to the frame and on the meeting edge of doors.
|
Door Type |
Frame Type |
Configuration |
Rating |
Maximum Size |
|
Wood Core |
Min. 16 gauge Steel |
Single |
20 Min. |
4'0" wide x 9'0" high |
|
Wood Core |
Min. 16 gauge Steel |
Pair (Standard or Double Egress) |
20 Min. |
8'0" wide x 9'0" high |
|
Category B Composite Core |
Min. 16 gauge Steel |
Single |
45 Min. |
4'0" wide x 9'0" high |
|
Category B Composite Core |
Min. 16 gauge Steel |
Pair (Standard or Double Egress) |
45 Min. |
8'0" wide x 9'0" high |
|
Category B Composite Core |
Min. 16 gauge Steel |
Single |
60 Min. |
4'0" wide x 9'0" high |
|
Category B Composite Core |
Min. 16 gauge Steel |
Pair (Standard or Double Egress) |
60 Min. |
8'0" wide x 9'0" high |
|
Category B Composite Core |
Min. 16 gauge Steel |
Single |
90 Min. |
4'0" wide x 9'0" high |
|
Category B Composite Core |
Min. 16 gauge Steel |
Pair (Standard or Double Egress) |
90 Min. |
8'0" wide x 9'0" high |
Testing Standard: UBC-7-2-97/UL-10C (Positive Pressure).
Evaluated to the following:
This category includes field-applied systems only. Category G - Edge-Seal Systems are for use in Category B doors, or meeting edges (only) of Category A doors. These systems are surface-applied to either the perimeter of the door or frame, or meeting edge of the door. They may be kerf-applied, adhesive-backed, or mechanically fastened.
Edge-sealing systems are identified by a label or marking bearing the Warnock Hersey Certification Mark. See Positive Pressure Section Header for more information.
