Lorient ES994 Edge Seal System for use in up to 20 minute rated assemblies around the perimeter of the door attached to the frame and on the meeting edge of doors.
|
Door Type |
Frame Type |
Configuration |
Maximum Size |
|
Wood Core Door |
Solid Wood with Min. SG = 0.47 |
Single |
4'0" wide x 9'0" high
|
|
Wood Core Door |
Solid Wood with Min. SG = 0.47 |
Pair |
8'0" wide x 9'0" high
|
|
Wood Core Door |
Min. 20 gauge Steel |
Single |
4'0" wide x 9'0" high
|
|
Wood Core Door |
Min. 16 gauge Steel |
Pair |
8'0" wide x 9'0" high
|
|
Wood Core Door |
Min. 0.0325" Aluminum |
Single |
4'0" wide x 7'0" high
or
3'0" wide x 8'0" high
|
Testing Standard
UBC-7-2-97/UL-10C (Positive Pressure).
Evaluated to the following:
This category includes field-applied systems only. Category G - Edge-Seal Systems are for use in Category B doors, or meeting edges (only) of Category A doors. These systems are surface-applied to either the perimeter of the door or frame, or meeting edge of the door. They may be kerf-applied, adhesive-backed, or mechanically fastened.
Edge-sealing systems are identified by a label or marking bearing the Warnock Hersey Certification Mark. See Positive Pressure Section Header for more information.
