Raco 90 Min Aluminum Fire Door Frame
Company: Raco Interior Products Corporation
Raco Extruded Aluminum Fire Door Frame (Fixed) for installation in 1-1/2 hour locations in fire rated steel/wood stud drywall openings. For use with listed and labeled fire rated steel doors only. Please consult the individual door listings for the restrictions and limitations which pertain to the door construction.
STANDARD PAIRS
| Maximum Size of Rough Openings: |
Door Width +1" x Door Height +1/2" |
| Maximum Size of Frame: |
8'3" wide x 9'1-1/2" high |
| Maximum Door Pair Size: |
8'0" wide x 9'0" high (4'0" wide x 9'0" high per leaf) |
| Minimum Wall Thickness: |
4-5/8" |
| Maximum Wall Thickness: |
13" |
SINGLE SWING
| Maximum Size of Rough Openings: |
Door Width +1" x Door Height +1/2" |
| Maximum Size of Frame: |
4'3" wide x 9'1-1/2" high |
| Maximum Door Size: |
4'0" wide x 9'0" high |
| Minimum Wall Thickness: |
4-5/8" |
| Maximum Wall Thickness: |
13" |
Unless otherwise noted, assemblies in this section have been tested to the following standards:
CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies;
NFPA-252, Standard Methods of Fire Tests of Door Assemblies;
UL-10(c), Fire Tests of Door Assemblies;
and are installed, unless otherwise noted, in accordance with the following:
NFPA-80, Fire Doors & Windows.
Manufacturer's Instructions.
All frames are identified by either a label or embossed marking bearing the wording "Listed (Product)" and the WHI Certification Mark. Frames rated for less than 3 hours also bear the time interval.
