DOORS - ROLLING STEEL
Vertical Rolling, Steel Fire Door and Guide Assembly for installation in concrete, masonry, structural steel or gypsum board walls with 16 gauge minimum metal studs in 3 or 4 hour locations (May be furnished with Approved Gasketing Material for Smoke & Draft Control Rating) (Model Nos. FD, FD1, FD2, FD3, FD4, FD5, FDWI Series)*.
Limitations: Limited to 3/4 hour locations when installed with a 6" wide x 1" high Light.
| Maximum Size of Openings: |
13'6" wide x 12'0" high. |
Vertical Rolling, Steel Service Counter Fire Door for installation in concrete, masonry, structural steel or gypsum board walls with 16 gauge minimum metal studs in 1-1/2 hour locations (May be furnished with Approved Gasketing Material) for Smoke & Draft Control Rating (Model No. FD10)* (May be furnished with optional stainless steel trim).
| Maximum Size of Openings: |
8'0" wide x 10'0" high. |
| Maximum Size with "S" Label: |
16'0" wide x 12'0" high |
Limitations: Limited to 3/4 hour locations when installed with a 6" wide x 1" high Light.
Vertical Rolling, Steel Service Counter Fire Door for installation in concrete, masonry, structural steel in 3 hour locations (May be furnished with Approved Gasketing Material) for Smoke & Draft Control Rating (Model No. FD10)* (May be furnished with optional stainless steel trim).
| Maximum Size of Openings: |
12'0" wide x 8'6" high. (50 sq ft Max) |
| Maximum Size with "S" Label: |
16'0" wide x 12'0" high |
Limitations: Limited to 3/4 hour locations when installed with a 6" wide x 1" high Light.
*Manufacturer's Designation, May be changed to "SD-10" when used with "S" label (For Smoke & Draft control rating).
Evaluated to the following:
Unless otherwise noted, assemblies in this section have been evaluated for conformance to the following standards:
CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies
NFPA-252, Standard Methods for Fire Tests of Door Assemblies
UL-10(b), Fire Tests of Door Assemblies
and are installed in accordance with the following:
NFPA-80, Fire Doors & Windows
Manufacturer's Instructions.
All assemblies are identified by a label or marking bearing the wording, "Listed (Products)", a time interval, temperature rise (if applicable), a serial number and the WHI Certification Mark.
(Unless otherwise specified, all Fire Doors have a nominal thickness of 1-3/4".)
COUNTERTOPS FOR USE WITH VERTICAL ROLLING DOORS
Mineral Core (HPL Laminated Surfaces), 1-1/2" thick Countertop for use with listed Vertical Rolling Fire Doors in 20 minute, 3/4 hour, 1 hour and 1-1/2 hour locations.
| Maximum Length of Countertop: |
9'0" |
| Maximum Width of Opening: |
8'0" |
Pressed Steel (Cold-Rolled or Stainless) (14 gauge) Countertop for use with listed Vertical Rolling Fire Doors in 20 minute, 3/4 hour, 1 hour and 1-1/2 hour locations.
| Maximum Length of Countertop: |
4'0" |
| Maximum Width of Opening: |
3'0" |
DOORS WITH OVERSIZE CERTIFICATES (No Fire Rating)
Doors Mounted to 1 or 2 Hour Drywalls
Oversize Certificate: Maximum of 1-1/2 hour location.
1. Model "FD" Series and "FDWI" Series
Maximum of 1-1/2 hour location
Maximum Width: 36’–6”
Maximum Height: 24’–0”
Maximum Area: 876 sq. ft.
2. Model "FD-10" Series
Maximum of 1-1/2 hour exposure
Maximum Width: 16' -0"
Maximum Height: 12' -0"
Maximum Area: 192 sq.ft.
Doors Mounted to 3 hour Concrete, Concrete Block,
Masonry Unit, or Structural Steel Jambs Walls
Oversize Certificate: Maximum of 3 hour location
1. Model “FD10” Series
Maximum Width: 16’–0”
Maximum Height: 12’–0”
Maximum Area: 192 sq. ft.
Doors Mounted to 4 hour Concrete, Concrete Block,
Masonry Unit, or Structural Steel Jambs Walls
Oversize Certificate: Maximum of 4 hour location
1. Model “FD” Series and “FDWI” Series
Maximum Width: 36’–6”
Maximum Height: 24’–0”
Maximum Area: 876 sq. ft.
