PRODUCT COVERED
Wood Door Frame "C1"
PRODUCT DESCRIPTION
Wood Door Frame (Knock-Down) for use singly or in pairs in 20 minute with hose stream locations. Wall construction: Steel/wood stud drywall. Refer to manufacturer's installation instructions for edge sealing system requirements.
Maximum Sizes:
|
Single-Swing |
3'6" wide x 8'0" high |
|
Pairs |
7'0" wide x 8'0" high |
Minimum Wall Thickness: 3-3/4 in.
LIMITATIONS
Cylindrical or Mortise Latches, Mortise Manual or Automatic Flush Bolts, Mortise Automatic Door Bottom.
EVALUATED TO THE FOLLOWING
This category includes frames not based on ANSI-A155.1/UL-63 construction Type (such as aluminum, wood, light gauge steel, composite, etc.). These listings will reference specific door types for which each frame is qualified. All frames listed in this section may be used in positive pressure assemblies per the terms and limitations of the individual listing.
All frames in this category are identified by a label or marking bearing the wording, "Listed Fire Door Frame", the Warnock Hersey Certification Mark, "UBC-7-2-97/UL-10C. Frames rated at less than 3 hours will have a time interval noted on the label/marking. See Positive Pressure Section Header for more information.
Unless otherwise noted, assemblies in this section have also been tested to the following standards:
ASTM-E152, Methods of Fire Tests of Door Assemblies;
CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies;
CSFM-43.7, Methods of Fire Tests of Door Assemblies;
NFPA-252, Standard Methods of Fire Tests of Door Assemblies;
UBC-7-2-94, Uniform Building Code;
UL-10(b), Fire Tests of Door Assemblies;
and are installed, unless otherwise noted, in accordance with the following:
NFPA-80, Fire Doors & Windows.
Manufacturer's Instructions.
