PRODUCT COVERED
Panel-Style Wood Doors (20 minute rating with Hose Stream)
PRODUCT DESCRIPTION
Panel Type (Proprietary construction) Wood Fire Door, for installation singly or in pairs in 20-minute locations (with hose stream). For use in any Category C – Standard Frame. These doors may also be installed in frames listed in Category C – Proprietary Frames, in accordance with the frame manufacturer's individual listing.
Maximum Sizes:
| Single-Swing |
3'6" x 8'0" (42 in. wide x 96 in. high) |
| Pairs |
7'0" x 8'0" (84 in. wide x 96 in. high) |
Limitations: Mortise or cylindrical latches and deadbolts with minimum 1/2 in. bolt throw and up to 2-3/4 in. backset, cylindrical deadbolts, surface applied hardware, viewers, surface mount bolts, mortise manual flushbolts with extension rods, mortise automatic flushbolts, surface plates up to 12 in. high, card reader, automatic door bottom, hold-open arm, astragal not required, maximum 1296 sq. in. lites (maximum lite width 32 in.).
EVALUATED TO THE FOLLOWING
This category includes doors evaluated without an edge-sealing system between the door and frame. It also includes doors evaluated with a sealing system incorporated (concealed or visible) into the edge of the door by the licensed manufacturer or machining distributor.
Meeting edges of pairs may require an astragal or an edge-sealing system. Please refer to individual door listings.
These doors are eligible for use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in the accordance with the frame manufacturer's individual listing.
All doors listed in Category A are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
All doors in this category are identified by a label or marking bearing the wording, "Listed Fire Door", a time interval, a temperature rise rating, a serial number and the Warnock Hersey Certification Mark and "UBC-7-2-97/UL-10C". See Positive Pressure Section Header for more information.
