Extruded Aluminum Door Frame (Altura 2*) for installation singly or in pairs in 3/4 hour locations in steel/wood stud drywall openings.
Limitations: Screws through faces or frame must be 6" o.c., maximum for 3/4 hour locations or 12" o.c., maximum for 20 minute locations.
| Maximum Size of Openings: |
Singles: 3'0" wide x 9'0" high
Pairs: 6'0" wide x 9'0" high |
| Maximum Overall Dimension: |
Singles: 39" wide x 109-1/2" high
Pairs: 75" wide x 109-1/2" high |
*/** - Manufacturer's designation
Evaluated to the following:
Unless otherwise noted, assemblies in this section have been tested to the following standards:
ASTM-E152, Methods of Fire Tests of Door Assemblies;
CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies;
NFPA-252, Standard Methods of Fire Tests of Door Assemblies;
UBC-7-2-94, Uniform Building Code;
UL-10(b), Fire Tests of Door Assemblies;
and are installed, unless otherwise noted, in accordance with the following:
NFPA-80, Fire Doors & Windows.
Manufacturer's Instructions.
Listed maximum sizes of lights are based on sizes tested and may exceed local code requirements.
All frames are identified by either a label or embossed marking bearing the wording "Listed (Product)" and the WHI Certification Mark. Frames rated for less than 3 hours also bear the time interval. Frame labels that do not include a time interval are rated for 3 hours.
