Vancouver 20 Min Fire Doors w/out Hose PP - SS and Pairs
Company: Vancouver Door LLC
CATEGORY A - DOORS - NO ADDITIONAL EDGE-SEALING SYSTEM REQUIRED:
Wood Core Type (Particleboard), Series 520p, Swinging Flush Design Fire door with hardwood stiles and rails for installation singly, in pairs, in double egress in 20 minute locations (without hose stream). For use in any "Category C - Standard" standard and steel Kerf type frame. These doors may also be installed in steel/wood frames listed in "Category C - Proprietary" in accordance with the door manufacturers installation instructions.
Limitations: Cylindrical and Mortise Latches to 2-3/4" Backset/Surface and Concealed Vertical Rod (LRB)/Rim Fire Exit Hardware/Surface Mounted/Mortised Manual/Automatic Flush Bolts/Raceways/Hinges (Excluding Pivots) per NFPA-80. Maximum 1296 in2 Clearview vision Panel with door provided with Top Latch/Bolt. Intumescent Strip must be provided in strike box.|
| Configuration |
Maximum Size |
Frame Type |
| Single |
4'-0" wide x 9-'0" high
3'-0" wide x 10'-0" high |
Steel & Wood |
| Pair |
8'-0" wide x 9'-0" high
6'-0" wide x 10'-0" high |
Steel & Wood |
| Double Egress |
8'-0" wide x 9'-0" high |
Steel |
Testing Standard: UL 10C (Positive Pressure).
Evaluated to the following:
This category includes doors evaluated without an edge-sealing system between the door and frame. It also includes doors evaluated with a sealing system incorporated (concealed or visible) into the edge of the door by the licensed manufacturer or machining distributor.
Meeting edges of pairs may require an astragal or an edge-sealing system. Please refer to individual door listings.
These doors are eligible for use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in the accordance with the frame manufacturer's individual listing.
All doors listed in Category A are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
All doors in this category are identified by a label or marking bearing the wording, "Listed Fire Door", a time interval, a temperature rise rating, a serial number and the Warnock Hersey Certification Mark and "UL 10C". See Positive Pressure Section Header for more information.
CATEGORY B - DOORS - ADDITIONAL EDGE-SEALING SYSTEM REQUIRED:
Wood Core Type (Particleboard), Series 520p, Swinging Flush Design Fire Door with Hardwood Stiles and Rails for installation singly, in pairs, in double egress pairs in 20 minute locations (without Hose Stream). For use in any "Category C - Standard" Kerf Type frame. These doors may also be installed in Kerf type wood/steel frames listed in "Category C - Proprietary" in accordance with the door manufacture installation instructions. A field applied edge-seal system is required. Please refer to the door manufacturer's installation instructions for edge-seal system requirements.
Limitations: Cylindrical and Mortise Latches to 2-3/4" Backset/Surface and Concealed Vertical Rod (LRB)/Rim Fire Exit Hardware/Surface Mounted/Mortised Manual/Automatic Flush Bolts/Raceways/Hinges (excluding pivots) per NFPA-80. Maximum 1296 in2 Clearview Vision Panel with door provided with Top Latch/Bolt For Pairs, Intumescent Strip must be provided in Strike Box.
| Configuration |
Maximum Size |
Frame Type |
| Single |
4'-0" wide x 9'-0" high
3'-0" wide x 10’0” high |
Steel
Wood |
| Pair |
8'-0" wide x 9'-0" high
6’-0” wide x 10’0” high |
Steel
Wood |
Evaluated to the following:
This category includes doors evaluated with an edge-sealing system (Category G) field-applied to the labeled frame or door. The application of the edge-sealing system does not require any machining of the frame or door. Please refer to "Category G - Edge-Sealing System" for individual manufacturer's listings.
These assemblies are eligible for use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in the accordance with the frame manufacturer's individual listing.
All doors listed in Category B are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
All doors in this category are identified by a label or marking bearing the wording, "Listed Fire Door", a time interval, a temperature rise rating, a serial number and the Warnock Hersey Certification Mark and "UL 10C". See Positive Pressure Section Header for more information.
DOORS:
Wood Core Type (Particleboard), Series 520P, Swinging Flush Design Fire Door with hardwood stiles and rails for installation singly or in pairs in 20 minute locations. POSITIVE PRESSURE: Smoke leakage tested when used with Zero International's labeled FS 820 Kerf Gasketing System or FS 850 Dado Gasketing System.
Limitations: Must be used with negative pressure labeled Dunbarton Corporation 16 or 18 gauge steel (knock down) Kerf Design Type Rediframe* or equivalent for the FS 820 Kerf Gasketing System or Negative Pressure Labeled Dunbaration Corporation 16 or 18 gauge steel (knock down) Rediframe* or equivalent for the FS 850 Dado Gasketing System, both in steel/wood stud drywall openings. May use other labeled frames for masonry openings. Minimum wall thickness 4". Cylindrical, and mortise latches to 2-3/4" backset, surface mounted vertical rod or rim type fire exit hardware, surface mounted top and bottom flush bolts, raceways, and hinges (excluding pivots) per NFPA 80. Pairs must use Zero International's Model No. 59 FS mortise meeting stile protection and intumescent strip in strike box.
| Maximum Size Door Openings: |
Singles: |
4'-0" wide x 9'-0" high
3'-0" wide x 10’-0” high |
| Pairs: |
8'-0" wide x 9'-0" high
6'-0" wide x 10’-0” high |
*Manufacturers Designation
Evaluated to the following:
Unless otherwise noted, assemblies in this section have been evaluated for conformance to the following standards:
NFPA-252, Standard Methods for Fire Tests of Door Assemblies
UL 10C, Positive Pressure Fire Test of Door Assemblies
Manufacturer's Instructions.
All assemblies are identified by a label or marking bearing the wording, "Listed (Product)", a time interval, temperature rise (if applicable), a serial number and the WHI Certification Mark.
(Unless otherwise specified, all Fire Doors have a nominal thickness of 1-3/4".)
