Trussbilt 20-180 Min Fire Door Frames
Company: Trussbilt, LLC
Pressed Steel Door Frame (16, 14, 12 gauge) (Welded Up or Knocked Down) for installation singly or pairs (including Double Egress) in 20, 45, 60, 90, 180 minute steel/wood stud drywall or masonry openings.
| Maximum size of openings: |
8'0" wide x 10'0" high w/o transom panel
8'0" wide x 12'0" high w/transom panel of same rating as door |
Pressed Steel Door Frame (16, 14, 12 gauge) (Welded Up) for installation singly or pairs (including Double Egress) in 20, 45, 60, 90 minute steel/wood stud drywall or masonry openings with side panels.
| Maximum size of openings: |
12'0" wide x 10'0" high |
Pressed Steel Door Frame (16, 14, 12 gauge) (Welded Up) for installation singly in 20, 45, 60, 90 minute steel/wood stud drywall.
| Maximum size of openings: |
3'6" wide x 7'0" high w/o transom panel |
Pressed Steel Door Frame (16, 14, 12 gauge) (Welded Up) for installation singly or pairs (including Double Egress) in 20, 45 minute steel/wood stud drywall or masonry openings with transom lights and/or side lights.
| Maximum size of openings: |
12'0" wide by 12'0" high |
| Maximum individual visible area of glazing panel: |
1,296 sq.in. |
| Maximum visible width of glazing panel: |
48" |
| Height of glazing panel: |
54" |
|
Limitations:
|
| Door stop depth: |
5/8" |
|
Depth of grooves for lights:
|
Visible Area
|
Groove Depth |
|
|
300 sq.in. |
1/2" |
|
|
400 sq.in. |
9/16" |
|
|
500 sq.in. |
5/8" |
|
|
600 sq.in. |
11/16" |
|
|
1296 sq.in. |
3/4" |
Evaluated to the following...
Unless otherwise noted, assemblies in this section have been tested to the following standards:
CAN/ULC S104), Standard Method for Fire Tests of Door Assemblies;
NFPA-252, Standard Methods of Fire Tests of Door Assemblies;
UL 10C, Positive Pressure Fire Test of Door Assemblies
and are installed, unless otherwise noted, in accordance with the following:
NFPA-80, Fire Doors & Windows.
Manufacturer's Instructions.
Listed maximum sizes of lights are based on sizes tested and may exceed local code requirements.
All frames are identified by either a label or embossed marking bearing the wording "Listed (Product)" and the WHI Certification Mark. Frames rated for less than 3 hours also bear the time interval. Frame labels that do not include a time interval are rated for 3 hours.
