SCM 90 Min to 3 Hour Steel Door Frames for use with Total Door Openings
Company: Stiles Custom Metal, Inc.
Pressed Steel Door Frame (Singles or Pairs) (Smoke Pocket Type) (14, 16 gauge) (Single Rabbeted) (Welded Up) for installation in 1-1/2 hour locations in steel/wood stud drywall openings.
| Maximum Size of Openings: |
Singles- 4'0" wide x 9'0" high
Pairs- 8'0" wide x 9'0" high |
| Maximum Overall Dimensions: |
Singles- 51" wide x 109-1/2" high
Pairs- 99" wide x 109-1/2" high |
| Minimum Throat Opening: |
3-1/2" |
| Maximum Stop Height: |
2-1/2" |
Pressed Steel Door Frame (16, 14 gauge) (Welded Up) for installation singly or in pairs including double egress in 3 hour locations in steel/wood stud drywall or masonry openings.
Limitations: Frame Face is 1-1/8" minimum
| Maximum Size of Openings: |
Singles- 4'0" wide x 8'0" high
Pairs- 8'0" wide x 8'0" high |
Note: For additional information please refer to the Openings and Pemko listings and Safti/O'Keeffe's listing for Superlite I.
Evaluated to the following...
This category includes frames not based on ANSI-A155.1/UL-63 construction Type (such as aluminum, wood, light gauge steel, composite, etc.). These listings will reference specific door types for which each frame is qualified. All frames listed in this section may be used in positive pressure assemblies per the terms and limitations of the individual listing.
All frames in this category are identified by a label or marking bearing the wording, "Listed Fire Door Frame", the Warnock Hersey Certification Mark, "UBC-7-2-97/UL-10C. Frames rated at less than 3 hours will have a time interval noted on the label/marking.
