Intertek Directory of Building Products

Fox Blocks Insulating Concrete Form (ICF) Products Company: Fox Blocks, a Division of Airlite Plastics Co. Code Compliance Research Reports: CCRR-1010

Fox Blocks ICFs

Fox Blocks ICFs are Insulating Concrete Form (ICF) systems that are formed of expanded polystyrene with polypropylene plastic cross-ties. Fox Blocks ICFs are pre-assembled ICF forms with a reversible, interlocking connection design. The systems are available in the following sizes and configurations:
  • 4" Straight
  • 4" 90° Corner
  • 4" 45° Corner
  • 6" Straight
  • 6" 90° Corner
  • 6" 45° Corner
  • 6" Corbel Ledge
  • 6" Taper Top
  • 6" T-Block  (Short)
  • 6" T-Block (Long)
  • 6" Radius Blocks (5',6',7',8',9' &10')
  • 8" Straight
  • 8" 90° Corner
  • 8" 45° Corner
  • 8" Corbel Ledge
  • 8" Taper Top
  • 8" T-Block  (Short)
  • 8" T-Block (Long)
  • 8" Curb Block
  • 10" Straight
  • 10" 90° Corner
  • 12" Straight
  • 12" 90° Corner
  • High Extender
Fox Blocks Compact ICFs

Fox Blocks Compact ICFs are Insulated Concrete Form (ICF) systems that are formed of expanded polystyrene with polypropylene plastic cross-ties. Fox Blocks Compact ICFs are pre-assembled ICF forms with a reversible, interlocking connection design. The systems are available in the following sizes and configurations:
  • 4" Straight
  • 4" 90° Corner
  • 4" Taper Top
  • 6" Straight
  • 6" 90° Corner
  • 6" 45° Corner
  • 6" Corbel Ledge
  • 6" Taper Top
  • 8" Straight
  • 8" 90° Corner
  • 8" 45° Corner
  • 8" Corbel Ledge
  • 8" Taper Top
  • 10" Straight
  • 10" Corbel Ledge
  • 10" Taper Top
  • 12" Straight
  • 12" Corbel Ledge
  • 12" Taper Top
Fox Blocks Reveal ICFs

Fox Blocks Reveal is a type of Fox Blocks ICFs which are insulating concrete form systems formed of expandable polystyrene, and with polypropylene plastic cross-ties. The Fox Blocks Reveal ICF has only one side of foam plastic panel, where the opposing side is a temporary plywood sheathing that is to be removed from installation site after curing of the concrete. The Fox Blocks Reveal products are available in the following configurations:
  • 4" Straight
  • 6" Straight
  • 8" Straight
  • 10" Straight
  • 12" Straight
Fox Blocks Compact Reveal ICFs

Fox Blocks Compact Reveal is a type of Fox Blocks Compact ICFs which are insulating concrete form systems formed of expandable polystyrene, and with polypropylene plastic cross-ties. The Fox Blocks Compact Reveal ICF has only one side of foam plastic panel, where the opposing side is a temporary plywood sheathing that is to be removed from installation site after curing of the concrete. The Fox Blocks Compact Reveal products are available in the following configurations:
  • 4" Straight
  • 6" Straight
  • 8" Straight
  • 10" Straight
  • 12" Straight
Fox Blocks and Fox Blocks Reveal Ratings
 
Product/Assembly Standard Rating (if applicable)
Fox Blocks and Fox Blocks Reveal ICFs ASTM E119 Design No. FXB/ICF 240-01
CAN/ULC S101
ASTM E2634, including:
ASTM C578 (EPS)
ASTM D635 (cross-tie)
ASTM D638 (cross-tie)
ASTM D732 (cross-tie)
ASTM D1761 (cross-tie)
ASTM D1929 (cross-tie)
ASTM E84 (EPS)
UL 1715 (ICF)

Type II EPS
CC1 classification
Min. tensile strength: 32.3 kN/m2 (675 lb/ft2)
Min. shear strength: 3080 psi
Refer to Table 2 of  CCRR-1010
Min. Ignition Temp. 350°C (662°F)
FSI ≤ 25, SDI ≤ 450
Meets ASTM E2634 Section 6.3.1
ICC-ES AC353 CCRR-1010
ASTM E283 (4” ICF) Max air infiltration 0.02 cfm/ft2
ASTM E331 (4” ICF) No water leakage after 2 hours;
15 psf pressure differential
CAN/ULC S717.1, including:
CAN/ULC S701 (EPS)
ASTM D635 (cross-tie)
ASTM D638 (cross-tie)
ASTM D732 (cross-tie)
ASTM D1761 (cross-tie)
ASTM D1929 (cross-tie)

Type 2 EPS
CC1 classification
Min. tensile strength: 32.3 kN/m2 (675 lb/ft2)
Min. shear strength: 3080 psi
Refer to Table 2 of CCRR-1010
Min. Ignition Temp. 350°C (662°F)
 
Fox Blocks Compact and Fox Blocks Compact Reveal Ratings
 
Product/Assembly Standard Rating (if applicable)
Fox Blocks Compact and Fox Blocks Compact Reveal ICFs ASTM E119 Design No. FXB/ICF 240-02
CAN/ULC S101
ICC-ES AC353 (2012)
ASTM C578 (EPS)
ASTM D635 (Cross-tie)
ASTM D1761 (Cross-tie)
ASTM D1929 (Cross-tie)
ASTM E84 (EPS)
UL 1715 (ICF)
CCRR-1010
Type II EPS
CC2 Classification
Refer to Table 2 of CCRR-1010
Min. Ignition Temp. 350°C (662°F)
FSI ≤ 25, SDI ≤ 450
Meets ICC-ES AC353 (2012), Section 3.4

CODE COMPLIANCE RESEARCH REPORT
 
Evaluation Method Building Code CCRR Number
ICC-ES AC353 2024, 2021, 2018 IBC
2024, 2021, 2018 IRC
2022 CBC
2022 CRC
2022 CGBSC, Tile 24, Part 11 (CALGreen)
2023, 2020 LABC
2015 NBCC -   Part 9                                                                       
CCRR-1010
 
Product Product Approval No.              
Fox Blocks, Fox Blocks Compact
and Fox Blocks Reveal
FL # 7497
Listing Report Return to Search
Attributes
CriteriaCAN / ULC S701 (2011)
CriteriaCAN / ULC S717.1 (2012)
CriteriaICC-ES AC353 (2012)
CriteriaCAN / ULC S101 (2014)
CriteriaASTM E119 (2020)
CriteriaASTM E2634 (2018)
CriteriaASTM C578:2019
CSI Code03 11 19 Insulating Concrete Forming
Listing SectionCONCRETE FORMS
Spec ID32745
Design Documents
Code Compliance Research Reports
Public Documents
No Results