Intertek Directory of Building Products

5000 Series Door/Frame Assemblies. Doors & Frames shall be manufactured from 12 gauge galvanized steel sheet. Corners shall be welded and ground smooth. Doors shall be 2-1/2" from front to back.

Mortise or cylinder lockset, surface mounted rim exit device for single point latching. Standard pairs three point latching; mortise, cylinder, fire exit devices, surface mounted vertical rod, concealed vertical rod standard pair, standard pairs require 3-point latching and interlock.

The use of one maximum size 5000 Series single swing door assembly in conjunction with up to three 5000 Series window assemblies in a single configuration is allowed.
 

Configuration	Maximum Size
Assembly Opening	7’-8” wide by 7’-10” high
Single Swing	3’-10” wide by 7’-10” high
Standard Pairs	7’-8” wide by 7’-10” high
Double Egress	Not Allowed

 

Vision Panels in Doors
The following maximum dimensions are Hope’s limitations for glass.  The final size must be determined between the glass manufacturer’s size limitations and Hope’s limitations.
Maximum Clear View Dimensions for a Single Panel:
Maximum Width	33-3/4”
Maximum Height	81-1/2”
Maximum Total Glazing Area	2750.6 in2

This category includes doors and frames that are labeled as an assembly.
 
Door and frame assemblies constructed as described in this procedure meet the requirements for both positive and neutral pressure fire tests, UL 10C , NFPA 252, and CAN/ULC S104 including the hose stream.  Minimum 3-point latching required for all pairs. 

Labeled door and frame assemblies must include installation instructions furnished by the door and frame assembly manufacturer.  Unless otherwise noted in the door and frame assembly installation instructions, all smoke/draft control gasketing used in the assembly are to be installed in accordance with their respective manufacturer’s instructions.