Intertek Directory of Building Products

The OPEN JOIST TRIFORCE^®, is a minimum 9-1/2-inch pre-fabricated parallel cord joist with a structural-quality OSB panel, which allows for 24 inches at one end for ease of cutting to length as required onsite. It is fabricated from selected wood and assembled using finger-jointed technology.

The GENIECLIP® RST, is a molded rubber and galvanized steel; clip used to attached drywall to either wall or floor/ceiling assemblies.
 
RATINGS
 

Standard	Rating	Design Number
ASTM E 119 / CAN/ULC S 101	45-Minute	BS/SFWT 45-01
	60-Minute	BS/SFWT 60-01
	60-Minute	BS/SFWT 60-02
	60-Minute	BS/SFWT 60-03
	60-Minute	BS/SFWT 60-04
	60-Minute	BS/SFWT 60-05
	60-Minute	BS/SFWT 60-11
	90-Minute	BS/SFWT 90-01
	120-Minute	BS/SFWT 120-01

 

Product name*	Lumber grade	Depth
OJ-314	G14 - 2x3	9.5
OJ-314	G14 - 2x3	11.875
OJ-314	G14 - 2x3	14
OJ-314	G14 - 2x3	16
OJ-315	G15 - 2x3	9.5
OJ-315	G15 - 2x3	11.875
OJ-315	G15 - 2x3	14
OJ-315	G15 - 2x3	16
OJ-318	G18 - 2x3	9.5
OJ-318	G18 - 2x3	11.875
OJ-318	G18 - 2x3	14
OJ-318	G18 - 2x3	16
OJ-320	G20 - 2x3	9.5
OJ-320	G20 - 2x3	11.875
OJ-320	G20 - 2x3	14
OJ-320	G20 - 2x3	16
OJ-414	G14 - 2x4	9.5
OJ-414	G14 - 2x4	11.875
OJ-414	G14 - 2x4	14
OJ-414	G14 - 2x4	16
OJ-415	G15 - 2x4	9.5
OJ-415	G15 - 2x4	11.875
OJ-415	G15 - 2x4	14
OJ-415	G15 - 2x4	16
OJ-418	G18 - 2x4	9.5
OJ-418	G18 - 2x4	11.875
OJ-418	G18 - 2x4	14
OJ-418	G18 - 2x4	16
OJ-420	G20 - 2x4	9.5
OJ-420	G20 - 2x4	11.875
OJ-420	G20 - 2x4	14
OJ-420	G20 - 2x4	16

 *Refer to Evaluation Report CCMC 13474-8 or ICC-ES ESR-2999 for Open Joist TRIFORCE^® Series structural requirements. 


This specification also confirms the product identified below is manufactured under a program of follow inspections for the following programs: 

Product	Manufacturing Location	Report No.
Open Joist Triforce	Trois-Rivieres, Quebec	ICC ES ESR-2999
TRIFORCE Wood Trusses	Trois-Rivieres, Quebec	FL No. 32093