PRODUCT COVERED
SECURALL 2 Hour Fire Rated Magazine Door and Frame Assembly
PRODUCT DESCRIPTION
Fire Rated Door and Frame Assembly, for installation in fire rated concrete or masonry wall construction; or, A&A Sheet Metal Products, Inc., Fire Rated Magazine Wall Assembly, where 1 hour positive pressure door rating is required. Door construction consists of steel panel on the exterior side; and, two layers of gypsum and a layer of fire retardant treaded plywood on the interior side.
MAXIMUM SIZES
Single Swing Door
42" wide x 84" high Nominal
Single Swing Frame
42" wide x 84" high Nominal
Thickness
5-9/16" Nominal
RATINGS
Up to 2 hour positive pressure to the following standards:
UL 10C
CAN/ULC S104
LIMITATIONS
This is a directional door with fire exposure from the steel side only. Use Specified Pad locked, Surface Mounted, Cam Type, Top and Bottom Lock System and two additional pad-locked points at door edge. This is a special purpose door which shall be maintained fully locked in order to meet the fire resistance ratings stated herein. This special purpose door, it is not considered an NFPA 80 compliant fire door.
