Model 707 Steel Door (Polystyrene, Polyurethane, or Honeycomb Core), Swinging Flush or Embossed Design Attack Resistant Door for installation in single swing applications with steel door frame and hardware as described below.
Single Swing Door Sizes
(Outswing) |
Min: 2’-8” x 6’-8”
Max: 4’-0” x 8’-0” |
|
Configuration |
Door: Curries Model 707 Steel Door (Polystyrene, Polyurethane, or Honeycomb Core)
Frame: Curries or Ceco Minimum 16 Gauge Steel Door, Door and Sidelight Frame, or Borrowed Light Frame.
Three-Sided Frame Size (Nominal):
· Width: 2' 8" to 4' 0"
· Height: 6' 8" to 8' 0"
Door & Sidelight Frame Size (Nominal):
· Width: 45-1/4" to 79-1/4"
· Height: 6' 8" to 8' 0"
· Visible Width (Light): 6" to 24"
· Visible Height (Light): 76-3/4" to 92-3/4"
· Optional: Welded horizontal mullions in sidelight frames.
ALTERNATE: Borrowed Light
Single Light Size Limitations:
-
Width: 8-1/4" to 29-1/4"
-
Height: 15-1/4" to 98"
-
Visible Width (Light): 3" to 24"
-
Visible Height (Light): 10" to 92-3/4"
-
Alternate Configuration: 35.813" visible width is allowed when visible height is limited to 44".
-
Optional: welded horizontal and/or vertical mullions in borrowed light frames
Latching Hardware: Sargent 8200 Series Mortise Lock with Latch Bolt, Deadbolt, and LS Trim
Hinges: Minimum 4-1/2" x 4-1/2" x 0.134" Full Mortise Butt Hinges (Steel or Stainless Steel, including Electric Hinges) [Minimum 3 Butt Hinges per Door Leaf] or Full Length Surface Mounted or Mortised Continuous Hinge (Steel or Stainless Steel)
Door Closer or Overhead Stop: Surface Mounted or Concealed
Door Bottom: Surface Mounted or Concealed
Protection Plate: Yes, Mechanically Attached or Adhered
Vision Kit (Optional): Curries Type 2 or Type 10 Steel Vision Kit with SG5TM Glazing
Plant-Ons: Yes, Wood Moulding or Metal Moulding.
Electrified Hardware: EPT, Door Position Switch, Magnetic Hold Open
Viewer: Yes, 1 max., with a max. diameter bore of 1/2" |
Minimum Door Thickness: 1-11/16"
Pairs - Not Allowed
Double Egress Pairs – Not Allowed
Tested to the following method: 5-aa10
