| Product |
Gas Fired Fireplace Insert |
| Brand Name |
Travis |
| Description |
The model 430 GSR2 is a direct vent gas fireplace insert suitable for use with natural gas or propane. The unit is factory installed for use with natural gas. A gas appliance conversion kit is provided to convert the fireplace to propane. The model 430 GSR2 features an automatic intermittent/standing pilot ignition system. A remote control is provided with the appliance to turn the fireplace off and on. |
| Models |
430 GSR2, 430 Mod Fyre |
| Model Similarity |
Both models are identical, with the exception of a contemporary burner, glass burner media, and under burner light kit for the 430 Mod Fyre. |
| Ratings |
120V, 60Hz, 1.8A |
APPLIANCE RATINGS
| |
NATURAL GAS |
PROPANE |
| Model |
430 GSR2 |
| Orifice Size (DMS) |
#50(F), #48(R) |
#60(F), 1.2 mm(R) |
| Normal Input Rate (Btu/hr) |
31,059 |
31,498 |
| Manifold Pressure at Normal Input Rate (in/wc) |
3.5 |
11.0 |
| Minimum Input Rate (Btu/hr) |
9,872 |
7,176 |
| Manifold Pressure at Minimum Input Rate (in/wc) |
1.6 |
2.9 |
| Minimum Inlet Pressure (in/wc) |
5.5 |
11 |
VENTING INFORMATION
| VENTING |
| Vent Type |
Co-linear |
| Vent Size |
3” Inlet, 3” Exhaust |
| Max. Vertical Length |
40ft (12.2M) |
| Min. Vertical Length |
8ft (2.5M) |
| VENT MANUFACTURERS |
| Enter Manufacturer Name |
DuraVent, MetalFab |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| FIREPLACE CLEARANCES TO GAS INSERT |
| Side of insert to inside of Fireplace |
0.5-in(13mm) |
| Back of insert to inside of Fireplace |
0.5-in(13mm) |
| Top of insert to inside of Fireplace |
0.75-in(19mm) |
| FIREPLACE CLEARANCES TO COMBUSTIBLES |
| Sidewall to insert |
5-in(127mm) |
| Side facing (Non-combustible) |
3.375-in(86mm) |
| Top facing (Non-combustible) |
32.375-in(823mm) measured from base of the insert |
| 12-in Mantel (combustible or non-combustible) |
34.5-in(877mm) |
| 4-in Mantel (combustible or non-combustible) |
33.5-in(851mm) |
| Hearth extension to the front |
0-in(45mm) |
| Extension onto Hearth |
0-in(0mm) |
This appliance must be installed in a masonry or zero clearance Fireplace. The 430 GSR2 insert must be connected to a listed high temperature (UL 103) 6" residential type chimney or an approved masonry chimney with a standard clay tile, or stainless steel liner.
