Intertek Directory of Building Products

McKEON FireFighter^® Model D200 and D200E curtain assemblies utilizing 1-hour-rated fabric are for use as a fire and smoke barrier when installed in a 1-hour steel stud/gypsum or masonry wall. Model D200E assemblies contain a passage door sealed with a hook & loop fastener. See below for ratings and limitations.

FIRE RATINGS

Test Standard	Rating
UL 10D	60 minutes
UL 10B, UL 10C, NFPA 252	20 minutes without hose stream

AIR LEAKAGE RATINGS

Test Standard	Test Type	Ratinga
UL 1784	Ambient Temperature	≤3.0 cfm/ft2 at up to 0.10 in. of w.c.
UL 1784	Elevated Temperature	≤3.0 cfm/ft2 at up to 0.10 in. of w.c.

^aThis assembly was evaluated without the use of an artificial bottom seal, and may be installed in areas where pressurization is provided to control smoke movement in accordance with Section 4.3.2 of NFPA 105 (2019) and for hoistway opening protection and lobby doorways as allowed in Chapter 30 of the IBC.

CODE COMPLIANCE RESEARCH REPORT

Evaluation Method	Building Code	CCRR Number
UL 10B UL 10C UL 10D UL 1784	2024, 2021, 2018 IBC 2024, 2021, 2018 IFC 2023, 2020 FBC 2022 CBC 2023 LABC 2024, 2021, 2018 NFPA 101	CCRR-0455

MAXIMUM SIZE LIMITATIONS

Certification Procedure	Maximum Area	Maximum Width	Maximum Height
LABEL	143 sq ft	13’-0”	11’-0”
CERTIFICATE/LABEL	unlimited*	unlimited*	unlimited*

 *Assemblies exceeding these dimensions must have an oversized label, issued by Intertek, stating the assembly is constructed in accordance with the certified design except for size. Acceptance of the oversize assembly is at the discretion of the Authority Having Jurisdiction.

MINIMUM SIZE LIMITATIONS (UL 1784 ONLY)*

Width	Height
29.5"	78"

*Fire-only assemblies do not have a minimum size.
 
Maximum Curtain Rivet spacing: 15” on-center
Maximum Hook & Loop length: 8’0”
Stainless Steel hook & loop required for fire applications
Side Guide anchorage: 1/4" anchors spaced maximum 18” on-center
Top Hood/Assembly mounting: maximum 40” on-center