PRODUCT DESCRIPTION
| Product |
Direct Vent Gas Fireplace Insert |
| Brand Name |
Jotul |
| Description |
The model GI 545 DV direct vent gas fireplace heater is designed to be inserted into existing solid-fuel fireplaces. It is equipped and operated with a millivolt pilot ignition system. The unit front contains a glass panel for viewing the flame and simulated wood logs. |
| Models |
GI 545 DV, GI 545 DV MV |
| Model Similarity |
The GI 545 DV and GI 545 DV MV fireplace inserts share the same construction, as they are essentially the same appliance, differing only in the valve design and function. The GI 545 DV utilizes a SIT 820 valve with standing pilot. The GI 545 DV MV model uses a SIT 821 valve with 7-day time-limited pilot ignition system. This difference is noted as applicable in the operation and parts listing sections of the manual. |
| Ratings |
120V, 0.53A, 60 Hz (Blower) |
APPLIANCE RATINGS
| |
NATURAL GAS |
PROPANE |
| Model |
GI 545 DV and GI 545 DV MV |
| Orifice Size |
#37 |
#53 |
| Normal Input Rate (Btu/hr)(0-4500-ft) |
30,000 |
28,000 |
| Manifold Pressure at Normal Input Rate (in.wc/kPa) |
3.8/0.945 |
11.0/2.74 |
| Minimum Input Rate (Btu/hr)(0-4500-ft) |
16,000 |
13,500 |
| Manifold Pressure at Minimum Input Rate (in.wc/kPa) |
1.1/0.274 |
2.9/0.722 |
| Minimum Inlet Pressure (in.wc/kPa) |
5.0/1.24 |
12.0/2.99 |
VENTING INFORMATION
Any combination of rise and run may be used if it is within the boundaries indicated below. The total vent length shall not exceed 35 feet. Refer to the Owner’s Manual for more details on the permissible venting configurations.
| VENTING |
| Vent Type |
Colinear flex vent |
| Vent Size |
3” x 3” colinear flex vent (for LP installations over 10’, a 4” exhaust vent is recommended) |
| Max. Vertical Length |
35-feet |
| Min. Vertical Length |
10-feet |
| VENT MANUFACTURERS |
| DuraVent |
GS |
| American Metal Products |
AmeriVent |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| FIREPLACE CLEARANCES |
| Side Trim (≤ 6” depth) from fireplace center (in/cm) |
20.75/53 |
| Sidewall from fireplace center (in/cm) |
27/69 |
| Top Trim from hearth (in/cm) |
37.25/95 |
| Floor protection – width from fireplace opening (in/cm) (flush with floor) |
3.125/8 |
| Floor protection – width from fireplace opening (in/cm) (raised 6” above floor) |
0/0 |
| Floor protection – depth from fireplace opening (in/cm) (flush with floor) |
12/31 |
| Floor protection – Depth from fireplace opening (in/cm) (raised 6” above floor) |
0/0 |
| 12” deep mantle from hearth (in/cm) |
39.75/101 |
