| Product |
Wood pellet grill |
| Brand Name |
Traeger Pellet Grills |
| Description |
The Pellet grill consist of the hopper, electrical compartment located below the hopper, barrel where the combustion of pellets in the fire pot have a place. Pellets from the hopper are delivered via a channel by the auger to a firepot where they are ignited by the ignitor. Ignitor is on only during first few minutes. The combustion process is supported by the air fan and auger motor delivering pellets and the air for combustion. Temperature is regulated by the temperature sensor by sensing the temperature and sending feedback to the controller which will increase/decrease or keep constant the angular speed of the auger. |
| Models |
TFB57GLE (Pro-Good Series) and TFB89BLE (Ironwood-Better Series) |
| Model Similarity |
Models TFB78GLE and TFB65BLE are similar models TFB57GLE and TFB89BLE, except for the Sq. inch grill space, represented by the 2 digits in the middle of the model nomenclature. Since the largest (TFB89BLE) and smallest (TFB57GLE) grills were tested as representative samples, these additional models are deemed to be compliant with the above referenced requirements as well.
The Silverton model TFS62GVF is a similar model to the Pro and Ironwood models. This model uses the same or similar electrical components, but can be operated at 500°F maximum operating temperature.
Additionally, the following models are deemed to be compliant with the above referenced requirements since they are identical in construction to the models referenced above, except for colour differences and marketing identifiers for Canada: TFB78GZE, TFB57GZE, TFB89BLEC, TFB65BLEC, TFB78GLEC, TFB57GLEC, TFB78GZEC, and TFB57GZEC. |
| Ratings |
100-240VAC, 50/60Hz, 95W, 1.09 kg/hr |
| CLEARANCES |
| Back |
18-inches |
| Side |
18-inches |
Electrical components consist of cULus power unit (converting 100-240VAC to 20VDC) wiring, ignitor, auger motor, air fan, controller devise. Please note that all components are powered by power unit and are intended for to operate under 20VDC. Hopper has a guard to prevent fingers to be placed into the auger. Additional feature is an ability to change temperature settings via Wi-Fi.
