SealTite™ Pro Open Cell is a water blown spray-applied cellular polyurethane foam plastic insulation that is installed on or in interior and exterior walls, floors, ceilings and the underside of roof decks. The foam plastic insulation is a two-component open-cell, one-to-one by volume spray foam system with a nominal density of 0.5 pcf. The insulation is produced in the field by combining a polymeric isocyanate (A component) with a polymeric resin blend (B component). SealTite™ Pro Open Cell is recognized in Intertek CCRR-1121.
SealTite™ Pro Open Cell meets the requirements of Mandatory Testing and selected Option Testing of ICC 1100 and ICC-ES
AC377 as described in Intertek Code Compliance Research Report CCRR-1121
.
MATERIAL RATINGS
| Test Standard |
Test Type |
Rating / Requirement |
| ASTM C518 |
Thermal resistance,
R-value (°F·ft2·h/Btu) |
See CCRR-1121 |
| ASTM D1622 |
Density |
0.5 - 1.5 lb/ft3 |
| ASTM D1623 |
Tensile Strength |
3 psi minimum |
| ASTM D2126 |
Aged for 168 hrs
@158°F, 97% R.H. |
15% maximum change |
| ASTM D2856 |
Closed Cell Content |
< 90% |
| ASTM E96 (Dessicant Method) |
Water Vapor Transmission |
See CCRR-1121 |
| ASTM E283 |
Air Leakage @ 3.5 in. thickness |
0.02 L/s/m2 maximum |
| NFPA 259 |
Potential Heat of
Building Materials |
See CCRR-1121 |
FLAME SPREAD RATINGS
| Test Standard |
Thickness |
Flame Spread
Index |
Smoke
Development
Index |
| ASTM E84 |
4 in. maximum |
25 or less |
450 or less |
OTHER FIRE RATINGS
| Test Standard |
Configuration |
Result |
| ASTM E119 |
See CCRR-1121 |
Met requirements
as configured |
ICC 1100, Section 302.5
ICC-ES AC377,
Appendix X |
See CCRR-1121 |
Met requirements
as configured |
| NFPA 285 |
See CCRR-1121 |
Met requirements
as configured |
| NFPA 286 |
See CCRR-1121 |
Met acceptance criteria of IBC Section 803.1.2.1 and IRC Section R302.9.4 as configured |
CODE COMPLIANCE RESEARCH REPORT
| Evaluation Method |
Building Code |
CCRR Number |
ICC 1100
ICC-ES AC377 |
2021, 2018, 2015 IBC
2021, 2018, 2015 IRC
2021, 2018, 2015 IECC |
CCRR-1121 |
