Product Description
Mineral Core Type (Fiberglass Reinforced Plastic-Faced), Swinging Flush Design Fire Door for installation singly or in pairs in up to and including 90 minute locations.
Limitations: Unit, Mortise/Cylindrical Latches with amaximum of 5" Backset/Surface Mounted/Mortised Manual Top and Bottom (Flush) Bolts/EPT/Lights - 1296 in
2/Metal Edges with astragal required.
| Maximum Size of Openings |
Singles – 4’-0" wide x 8’-0" high
Pairs* - 8’-0" wide x 8’-0" high
Thickness – 1 3/4" (+ 1/16") |
| Maximum Clear View Opening |
Lights – 36” wide x 36” high (1296 in2)
Louvers - 24" wide x 24" high (576 in2) |
*90 Minute pairs of doors shall be provided with an astragal attached to the inactive leaf
Evaluated to the Following
Unless otherwise noted, the product listed above in this section has been evaluated for conformance to the following standards:
- UL 10C – Positive Pressure Fire Test of Door Assemblies
- NFPA 252 – Fire Test of Door Assemblies
- CAN/ULC S104 – Standard Method for Fire Test of Door Assemblies
These doors are eligible for use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in the accordance with the frame manufacturer's individual listing.
All doors listed in Category A are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
All doors in this category are identified by a label or marking bearing the wording, "Listed Fire Door", a time interval, a temperature rise rating, a serial number, and the Warnock Hersey Certification Mark and "UL 10C". See Positive Pressure Section Header for more information.
