James Hardie - Hardie® Architectural Panels
Company: James Hardie Building Products, Inc.
Hardie® Architectural Panels (textured/nontextured, HZ5/HZ10) are fiber cement panel siding measuring 96, 120 or 144 inches long x 48 inches wide x 5/16 inches thick. The panels have a nominal weight of 2.3 lb/ft2.
PHYSICAL RATINGS
| Standard |
Rating |
| ASTM C1186 |
Meets Grade II, Type A |
| BS EN 12467 |
Meets Category A, Class 2, Level I |
| ISO 8336 |
Meets Category A, Class 2, Level I |
FLAME SPREAD RATINGS
| Standard |
Flame Spread Index |
Smoke Developed Index |
| ASTM E84 |
0 |
0 |
| CAN/ULC S102 |
0 |
0 |
FIRE RATINGS
| Product |
Standard |
Rating |
Design Listing Number |
Hardie® Architectural Panels (textured/
nontextured, HZ5/HZ10) |
ASTM E136 |
Non-combustible |
N/A |
| CAN/ULC S114 |
Non-combustible |
N/A |
ASTM E119
CAN/ULC S101 |
1 Hour |
JH/FCS 60-01
JH/FCS 60-02
JH/FCS 60-03
JH/FCS 60-04 |
| 2 Hours |
JH/FCS 120-01
JH/FCS 120-02 |
STRUCTURAL RATINGS
Structural rating per ASTM E330:
| System No. |
#1 |
|
Results:
Details:
|
Ultimate Load: 112 psf
Framing: Nominal 2x4 No. 2 SPF or BTR Lumber
Stud spacing: 16 in. on center
Fasteners: 16 gauge 1-1/2 in. stainless finish nails.
Fastener Spacing: 4 in. on center along studs. |
| |
#2 |
|
Results:
Details
|
Ultimate Load: 128 psf
Framing: Nominal 2x4 No. 2 SPF or BTR Lumber with 7/16 in. thick Wood Structural Panel sheathing attached per applicable Code.
Stud spacing: 16 in. on center
Fastener: 16 gauge 1-1/2 in. stainless finish nails.
Fastener spacing: 4 in. on center along studs and 4 in. on center along panel edges where panel edges may be attached to sheathing only. |
| |
#3 |
|
Results:
Details
|
Ultimate Load: 87.1 psf
Framing: Nominal 2x4 No.1 or better Douglas Fir
Stud spacing: 24 in. on center
Fastener: 16 gauge 1-1/2 in. stainless finish nails
Fastener spacing: 4 in. on center along studs |
| |
#4 |
|
Results:
Details
|
Ultimate Load: 88.2 psf
Framing: Nominal 2x4 No.1 or better Douglas Fir
Stud spacing: 24 in. on center
Fastener: 0.09 in x 1-1/2 in. 4d stainless steel ring shank siding nails
Fastener spacing: 4 in. on center along studs |
FLORIDA PRODUCT APPROVAL
| Report No. |
Product Covered |
| FL No. 13223 |
Hardie® Architectural Panels |
| FL No. 32103 |
Hardie® Textured Panels |
