Description
|
Swinging Door / Frame
|
Sliding Door / Frame
|
Glazing Frame
|
Door Frame Material |
12 Ga CRS steel frame with 12 Ga CRS internal frame reinforcement lining the frame face, and depth of rabbet, located adjacent to door.
(12 Ga = 0.100" min. thickness all areas.) |
Same as swinging / sliding frame, except the internal frame reinforcement lining the frame face and depth of rabbet shall be located adjacent to glazing. |
| Door Skin Material |
12 Ga CRS steel skin with 28 Ga internal “truss” and mineral wool insulation |
N/A |
| Material Options |
Plain (uncoated) CRS / A60 / G90; Stainless Steel, Type 304 or Type 316 |
| Minimum Opening Size (Single, WxH) |
2’-6" W x 6’-8" H |
2’-6" W x 6’-8" H |
1’-0” W x 1’-0” H |
| Maximum Opening Size (Single, WxH) |
4’-0" W x 8’-0" H |
4’-0" W x 8’-0" H |
4’-0" W x 8’-0" H or per glazing certification. (Glazing dimensions may be rotated.) |
| Minimum Door Pair Size (WxH) |
5’-0" W x 6’-8" H |
N/A |
N/A |
| Maximum Door Pair Size (WxH) |
8’-0" W x 8’-0" H |
N/A |
N/A |
Door Pair Astragal
(Required) |
Door pairs require a 1/4" X 1-1/2" continuous astragal at meeting edge, full door height, same material as door skin, attached via security screws or plug welded to active door |
N/A |
N/A |
Frame Dimensions
(lockset in door) |
1”-4” face-width jamb-stiles and header-rail, single or double rabbet, having 4"-12” face-to-face dimension and ¾”H x 1-1/8”W integral frame stop. |
1"-4" face width jamb stiles; 1"-16" face width header rail (to contain door operator), cased open profile, 4"-12" face-to-face depth dimension.
|
Perimeter framing 1” - 4” face-width stiles and header-rail, single or double rabbet, 1-1/8” to 4” face-width mullion stiles and rails. Rabbet depth per glazing thickness, with overall max 14” face-to-face depth. Perimeter and mullion framing must have internal frame reinforcement lining the frame face, and depth of rabbet, located adjacent to glazing. |
Frame Option Dimensions
(lock jamb width only when lockset installed in frame) |
Frame face may be 8”-12” wide. The internal frame reinforcement must extend full face width and depth of door rabbet. |
Frame face may be 8”-12” wide. The internal frame reinforcement must extend full face width and depth of jamb.
|
N/A |
Frame Weld |
Continuous weld is applied to stile-to-rail miter joints, both sides, extending across frame face, full depth of rabbet, and height of integral soffit stop. |
Continuous weld is applied to stile-to-rail miter joints, both sides, extending across frame face and full depth of jamb.
|
Continuous weld is applied to all stile-to-rail joints at perimeter and mullion joints, extending across the frame face, full depth of rabbets, and across height of integral soffit stop. |
Hinges |
Fire-rated ferrous or non-ferrous hinges must meet the requirements of NFPA 80. Butt hinges per ANSI/BHMA A156.1; Pivots per ANSI/BHMA A156.4; Continuous Hinges per ANSI/BHMA A156.26 |
N/A |
N/A |
Glazing frame integral to door or glazing frame |
Ballistic-rated vision lites are permissible. Minimum glazing size 12” x 12”; Maximum glazing size per certification. The framed opening shall be lined between door skins with minimum 12 Ga Z-liner, plug welded to both skins. The built-in glazing retainer (threat side) shall be two (2) thicknesses 12 Ga material (door skin + Z-liner). The removable glazing retainer (secure side) shall be 0.100” (ref. 12 Ga) thick steel material with welded corners, ground smooth, and affixed to the door with minimum ¼” dia. screws located 2” from corners and spaced 8” max O.C., min. 3 per side. |
Minimum glazing pane size is 12” x 12”; Maximum per glazing certification. The glazing retainer (secure side) shall be 0.100” (ref. 12 Ga) thick frame material with welded corners, ground smooth, and affixed to the framing with minimum ¼” dia screws placed 2” from corners and spaced 8” max O.C., minimum 3/side. |
| Glazing Notes |
Glazing (vision panels) shall be listed for appropriate level of UL752.
Glazing certified by others (not part of this certification). |
| Maximum Door or Glazing Edge to Frame Gap |
1/8” Maximum |
N/A |
¼” Maximum |
Limitations |
- Split-leaf, Service Counter, or “Dutch" doors” are not listed.
- This listing covers the door and door frame only.
- Certified door hardware listed separate.
|
