Product Covered
Dortek Inc. - Fire Door (Category A) - F Type - UL 10C
Category A Doors - No additional edges-sealing system required
Product Description
Door Leaf - Glass reinforced concrete (GRC) based door leaf with GRP facings - Nominal thickness - 39mm to 46mm, for installation in listed Category C - GRP/Steel/Stainless-Steel Frames.
Door leaf incorporates concealed intumescent strip on the top and vertical edges.
Hardware and latching requirements - UL 10C listed mortise single point center latching hardware or listed surface mounted vertical rods - (top and bottom) with panic bar. Electric retraction option is allowed with both types with provision for the cable through the exit device.
Option A:
Dortek Vision Panel Kit is allowed for up to 90-minute rating with Maximum sight size - 230mm x 230mm (w x h) and for up to 60-minute rating with Maximum sight size - 375mm x 575mm (w x h). Glass - a combination of 6mm thick tempered glass (outer glass panels) and 5mm thick Firelite glass (inner glass pane), overall thickness is 40mm or alternative listed glazing.
Option B:
Dortek Vision Panel Kit is allowed for up to 90-minute rating - Maximum sight size -150mm x 797mm (w x h) or 350mm x 547mm (w x h). Glass - Pyrobel 120, 40mm thick glazing panes installed with 3mm stainless-steel flanges.
Electric Power Transfer Unit with 10mm conduit in door from lockset to hinge edge (ref: Assa Abloy – Securitron EL-EPT/EL-EPT-SC or alternative listed hardware) is allowed.
Lead lined doors are allowed.
Fire Ratings
The product noted above has been tested and evaluated according to UL 10C - Positive Pressure Fire Tests of Door Assemblies and has qualified
for the following applications and fire ratings:
| Configuration |
Rating |
Maximum leaf dimension |
Frame type |
| Single leaf |
1/3 hour (20 minutes) |
1230 x 2040 (mm, w x h) |
GRP |
| 1 hour (60 minutes) |
914 x 2162 (mm, w x h) |
Steel/Stainless Steel |
| 1-1/2 hour (90 minutes) |
914 x 2134 (mm, w x h) |
GRP |
| Double leaf |
1/3 hour (20 minutes) |
935 x 2160 (mm, w x h) |
Steel/Stainless Steel |
| 1 hour (60 minutes) |
1219 x 2438 (mm, w x h) |
GRP/Steel/Stainless Steel |
| 1-1/2 hour (90 minutes) |
914 x 2134 (mm, w x h) |
GRP |
| 1-1/2 hour (90 minutes) |
914 x 2714 (mm, w x h)
with 40mm core |
GRP |
| Double action double leaf |
1/3 hour (20 minutes) |
1024 x 2040 (mm, w x h) |
GRP |
