PRODUCT DESCRIPTION
| Product |
Solid fuel central and supplementary hot air furnace |
| Brand Name |
Legacy Stoves |
| Description |
These are manual fed Coal fired forced air central furnaces. The furnace is connected to a remote mount room thermostat that signals the furnace when heat is needed. When the heat exchanger reaches a pre-determined temperature, the fan control energizes the circulating warm air blower. A high limit control is provided to shut off the fuel supply and combustion air in the event of an over temperature condition arise and or temperature regulator malfunctioned. When the room or wall thermostat satisfied the combustion air actuator will be in closed position. If the thermostat unsatisfied the combustion air actuator is in the opened position unless the fan limit control is above the high limit. So, the wall thermostat can turn the combustion air actuator on and off but, only if the fan limit control allows it. The combustion air actuator is opened by the wall thermostat but, the combustion air actuator is shut down by the high limit control. |
| Models |
SF1500, SF2500, SF3500 |
| Model Similarity |
All models are similar in design, with the differences being the physical size and the output energy. |
| Ratings |
Heat Output:
Model SF1500 - 90,000 Btu/Hr.
Model SF2500 - 120,000 Btu/Hr.
Model SF3500 - 170,000 Btu/Hr.
Electrical Ratings: 120V, 6.7A, 60Hz |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| CLEARANCES |
| Sidewall |
24-in |
| Backwall |
30-in |
| Top |
24-in |
| Front |
48-in |
| VENTING SYSTEM CLEARANCES |
| Single Wall Chimney Connector - Sidewall |
21-in |
Unit must be placed on a non-combustible floor extending under the appliance, with a minimum of 16-inches from the front and 8-inches beyond both sides for the fueling door. Floor protection must extend 2-inches beyond each side of a horizontal chimney connector.
