Technical Glass Products TGProtect™
FR System Swinging Door with Sidelite is a forced entry attack resistant steel frame and glass door with sidelight assembly utilizing impact resistant glazing. The inswing door is hinged at the integral mullion. One additional sidelight at sidelight side of the assembly is optional with size limited in width to no greater than 36-3/4 inches.
| |
Width* |
Height |
Maximum
Overall Assembly Size |
79-1/2 inches
(2019 mm) |
98 inches
(2489 mm) |
| Maximum Door Size |
36-3/4 inches
(933 mm) |
95-7/8 inches
(2435 mm) |
| Door Clearview glass size |
29-1/2 inches
(749 mm) |
88-3/4 inches
(2254 mm) |
| Maximum Clearview Sidelight |
36 inches
(914 mm) |
92 inches
(2337 mm) |
Insulating Glass Unit (IGU)
|
Option 1.
31/32-inch FireLite Plus Hurricane IGU
60 MIN |
Option 2.
1- inch FireLite NT IGU (+SG5)
60 MIN |
| Latching Hardware |
(1) WSS DS Mortise latch and handle without deadbolt |
Located at height of 39.5 inches from bottom rail |
| Hinges |
(3) Barrel Pivot Hinges |
Center of top and bottom hinges located at 180 mm (7 -13/32") from top / bottom of door leaf. center hinge located 480mm (25-13/32") from center of top hinge. |
| Closer |
(1) top rail hydraulic closer |
Located 6-3/4 inches
from hinge stile. |
* Maximum width when including optional additional sidelight is 116-1/4" .
RATINGS
| Test Standard |
Test Type |
Rating |
| ASTM E2395 |
Forced Entry |
Performance Level "L4" |
| ASTM E2395 Sec. 6.4 |
Glazed Area Intrusion |
ASTM E1996 Missile "C" |
Head, sill and jambs to be anchored 18 inches on center and a maximum of 3-15/16 inch (100mm) from each end. The Anchors to be #12 x 4" flat head screws to Spruce-Pine-Fir dimensional lumber or equivalent fastening system by design.
