PRODUCT DESCRIPTION
| Product |
Pellet Fuel Room Heater |
| Brand Name |
ComfortBilt |
| Description |
The model HP40 Wood Pellet Fueled Room Heater is constructed of carbon steel with a cast iron firebox access door. The outer dimensions are 21-inches/533mm deep, 27.5-inches/699mm high, and 16.625-inches/422mm wide. The heat exchanger is located directly above the firebox with outlet air grille positioned below the firebox access door. A galvanized steel fuel hopper located at the top back of the unit. |
| Models |
HP40 |
| Model Similarity |
None |
| Ratings |
115V, 60Hz
Input rate – 3.50 lb/hr |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| CLEARANCES |
| Side (in/mm) |
6/152 |
| Back (in/mm) – to control panel |
0/0 |
FLOOR PROTECTION REQUIREMENTS
Unit is acceptable for use on a combustible surface. A non-combustible protective cover must be placed a minimum of 6-inches from the front and 6-inches beyond both sides for the fueling door. Floor protection must extend 2-inches beyond each side of a horizontal chimney connector.
