Becker Millwork and Doors - 20 Minute Without Hose Stream Wood Faced Flat and Raised Panel Door Assembly
Wood Faced Flat and Raised Panel (Proprietary Construction), Single Swing Fire Door for installation in 20 minute single locations (without hose stream). For use in any listed and rated solid wood frames in accordance with the frame manufacturer's individual listing.
Limitations*
Cylindrical Latch/Deadbolts/Mortise Locks/Multi Point Locks/Surface Mounted Rim Type Fire Exit Devices/Surface Mounted Closers/Surface Mounted Protection Plates/Viewer/Surface Mounted Door Bottoms/Applied Moulding.
| Configuration |
Maximum Size |
| Single Swing |
3’-0” wide by 8’-0” tall |
| Standard Pairs |
N/A |
| Double Egress |
N/A |
*See manufacturer's installation instructions for additional information on Smoke and Draft Control, size restrictions, and limitations.
These doors may be installed in any listed and rated solid wood frames in accordance with the frame manufacturer's individual listing.
One strips or a full door width listed surface applied intumescent is required on the head of the frame assembly and along the vertical edges of the frame assembly.
All doors listed in Category B are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
Evaluated to the following
Unless otherwise noted, the product listed above in this section has been evaluated for conformance to the following standards:
- UL 10C – Positive Pressure Fire Test of Door Assemblies
- NFPA 252 – Fire Test of Door Assemblies
