PRODUCT DESCRIPTION
| Product |
Solid Fuel Room Heater |
| Brand Name |
Jotul |
| Description |
A medium north /south loading adjustable-rate free standing non-catalytic wood heater employing a stepped baffle secondary combustion technology. The unit is composed of primarily a steel fire box and cast-iron exterior construction.
Baffle
- Location: between top of combustion chamber and hearth
- Restriction: 2.750 X 18.750 inches at the front of unit
- Dimensions: covers the hearth area minus the restriction at front
- Material: Stainless Steel, covered by ½ thick ceramic blanket
Firebox material
- Firebrick 1 ¼ thick lining cover all sides and bottom
Flue gas exhaust
- Location: Back
- Dimensions: 6 inches
- Material: Cast Iron
Gasket
- Door: Fiberglass rope. 5/8” dia. Low density
- Glass: Fiberglass rope. 1/4” dia. Low density
- Refer to appendix 6 for all details and location
Overall unit dimension
- Usable volume: 1.57 cuft.
- Refer to appendix 12 for volume calculation
- Overall heater dimension: 23-inch-wide 26.750-inch-deep 26.250 inch high
|
| Models |
F35 |
| Model Similarity |
None |
| Ratings |
None |
CLEARANCES TO COMBUSTIBLE CONSTRUCTION
| CLEARANCES |
| |
Unprotected Surface |
Protected Surface |
| Side |
Rear of unit |
Corner |
Side |
Rear of unit |
Corner |
| Single wall connector |
13-in
330-mm |
14-in
356-mm |
10-in
254-mm |
4-in
101-mm |
6-in
152-mm |
4-in
101-mm |
| Double wall connector |
13-in
330-mm |
8-in
203-mm |
9-in
229-mm |
4-in
101-mm |
6-in
152-mm |
4-in
101-mm |
Alcove
d/w connector |
14-in
356-mm |
19-in
483-mm |
NA |
6-in
152-mm |
9-in
229-mm |
NA |
| ALCOVE DIMENSIONS |
| Width (Min – DWC – unprotected surface) |
50.25-in/1276 mm |
| Width (Min – DWC – protected surface) |
34.25-in/870 mm |
| Height (Min – DWC – unprotected surface) |
72-in/1829 mm |
| Height (Min – DWC – protected surface) |
65-in/1651 mm |
| Depth (Max) |
48-in/1219 mm |
FLOOR PROTECTION REQUIREMENTS
Unit is acceptable for use on a combustible surface. A non-combustible protective cover must be placed a minimum of 16-inches from the front and 8-inches beyond both sides for the fueling door. Floor protection must extend 2-inches beyond each side of a horizontal chimney connector.
