The LP WeatherLogic
® Air & Water Barrier system is comprised of the LP WeatherLogic
® Panel and the LP WeatherLogic
® Seam & Flashing Tape or LP WeatherLogic
® Seam & Flashing Sealant.
LP WeatherLogic® Panel: The LP WeatherLogic
® Panel consists of a 7/16 to 5/8 Performance Category Oriented Strand Board (OSB) panel adhered with a factory-applied proprietary overlay. The Structural 1, Exposure 1 OSB complies with US DOC PS 2 for wood structural panels with a span-rating of 24/16, 32/16, or 40/20.
LP WeatherLogic® Seam & Flashing Tape: The LP WeatherLogic
® Seam & Flashing Tape is a pressure-sensitive, coated polymeric film that is produced in either 3-3/4- or 6-inch widths. The tape is used for sealing joints, penetrations, openings, and material transitions.
LP WeatherLogic® Seam & Flashing Sealant: The LP WeatherLogic
® Seam & Flashing Sealant is a liquid-applied sealant that is supplied in tubes. The sealant must be applied a minimum of 15 mils thick and sufficiently wide to extend a minimum of 1-3/4 inches on each side of seams and 1-1/4 inches beyond nail heads. The sealant is used to seal panel joints and to flash penetrations, openings, and material transitions.
This listing is for ASTM E119 and UL 263 Fire Performance only. For other performance and code compliance attributes, see Intertek Listing 51243.
FIRE RATINGS
| Test Standard |
Rating |
Design Number |
| ASTM E119, UL 263 |
1 hr - 41% Maximum Design Load |
LPC/WPPS 60-01 |
| ASTM E119 |
1 hr - 100% Maximum Design Load |
LPC/WPPS 60-02 |
