Report Subject:
StoVentec Render and StoVentec Masonry Veneer Exterior Rainscreen Cladding Systems
StoVentec Render: This system consists of Sto base coat, Sto glass fiber mesh reinforcement and either Sto finish coatings or factory cast finishes applied over the Sto Carrier Board A+ substrate. Sto Carrier Board A+ is attached to a Sto sub-construction that is anchored to a structural base wall protected with StoGuard® air & water-resistive barrier.
StoVentec Masonry Veneer: This system consists of a Sto base coat and Sto glass fiber mesh applied over the Sto Carrier Board A+ substrate. Sto Carrier Board A+ is attached to a Sto sub-construction that is anchored to a structural base wall protected with StoGuard air and water-resistive barrier. Manufactured stone or thin brick tiles are adhered to Sto Carrier Board A+ with a Sto adhesive mortar.
Code Compliance Research Report
| Evaluation Method |
Building Codes |
Report No. |
| IBC/IRC 104.11 |
2021, 2018 IBC
2021, 2018 IRC
2023 FBC
2022 CBC
2023, 2020 LABC |
CCRR-0454 |
FLORIDA PRODUCT APPROVAL
| Report No. |
Product Covered |
| FL No. 41659 |
StoVentec Render and StoVentec Masonry Veneer Exterior Rainscreen Cladding Systems |
