McGrory - Fuego Light Series 20-90 Minute Fire Door Frame
Company: McGrory Glass Inc.
PRODUCT COVERED
20-90 Minute Fuego Light Series Fire Door Frame
PRODUCT DESCRIPTION
Insulated fully welded steel frame for installation in up to and including 90 minute locations in masonry or steel stud drywall openings. For use with listed and labeled 20, 18, or 16 gauge foam filled or honeycomb filled hollow metal doors or composite wood doors per the door manufacturer's individual listing(s).
Sizes
| Single Swing |
1270 mm (50 in.) wide by 2438 mm (96 in.) high |
| Standard Pairs |
2540 mm (100 in.) wide by 2438 mm (96 in.) high |
| Frame Face |
50 mm (1-15/16 in.) |
| Jamb Depth |
65 mm (2-9/16 in.) or 110 mm (4-5/16 in.) |
| Minimum Stop Height |
15.9 mm (5/8 in.) |
Evaluated to the following:
Unless otherwise noted, assemblies in this section have been tested to the following standards:
- UL 10B, Fire Tests of Door Assemblies
- UL 10C, Positive Pressure Fire Test of Door Assemblies
- NFPA 252, Standard Methods of Fire Tests of Door Assemblies
- CAN/ULC-S104, Standard Method for Fire Tests of Door Assemblies
and are installed, unless otherwise noted, in accordance with the following:
- NFPA 80, Fire Doors and Other Opening Protectives
All frames in this category are identified by either a label or embossed marking bearing the wording "Listed Fire Door Frame”, the Warnock Hersey Certification Mark, and UL 10C and CAN/ULC-S104. Frames rated for less than 3 hours also bear the time interval.
This category includes frames not based on UL-63 construction Type (such as aluminum, wood, light gauge steel, composite, etc.). These listings reference specific door types for which each frame is qualified. All frames listed in this section may be used in positive pressure assemblies per the terms and limitations of the individual listing.
