Intertek Directory of Building Products

Jeld-Wen 8-007-X-19 and 8-007-X-20 Polyvinyl Acetate (PVA) Adhesive

Jeld-Wen 8-007-X-19 Polyvinyl Acetate (PVA) Adhesive is used as a component in 20 through 90 minute flush wood fire door assemblies to adhere the core material to the crossband material with wood veneer faces (may also be used to adhere the wood veneer faces to the crossband material) in the following door constructions.

• Any listed and labeled 20 minute flush wood door with a solid wood type core (e.g., particleboard, wood block (stave), agrifiber, etc.)
• 45 Minute flush wood doors with Warm Springs listed fire rated WSCP 412 mineral core.
• Up to and including 90 minute flush wood doors with Lexington Response Engineered Mineral (REM) core.

Jeld-Wen 8-007-X-20 Polyvinyl Acetate (PVA) Adhesive is used as a component in 20 and 45 minute flush wood fire door assemblies to adhere the core material to the crossband material with wood veneer faces (may also be used to adhere the wood veneer faces to the crossband material) in the following door constructions.

• Any listed and labeled 20 minute flush wood door with a solid wood type core (e.g., particleboard, wood block (stave), agrifiber, etc.)
• 45 Minute flush wood doors with Warm Springs listed fire rated WSCP 412 mineral core.
• Up to and including 90 minute flush wood doors with Lexington Response Engineered Mineral (REM) core.

Ratings and Limitations
For use as a listed internal component within listed and labeled positive or neutral pressure 20 through 90 minute flush wood fire rated doors with wood veneer faces.

Minimum Application Rate

• 63.5 grams (± 0.5 grams) per ft² of panel face (20 minute flush wood doors with solid wood core & 45 minute flush wood doors with Warm Springs core).
• 110 grams (± 0.5 grams) per ft² of panel face with 8-007-X-19 PVA Adhesive and 34.3 grams (± 0.5 grams) per ft² of panel face with 8-007-X-20 PVA Adhesive (Lexington REM core).

Evaluated to the Following
Unless otherwise noted, the product listed above in this section has been evaluated for conformance to the following standards:

• UL 10C – Positive Pressure Fire Test of Door Assemblies
• NFPA 252 – Fire Test of Door Assemblies
• CAN/ULC S104 – Standard Method for Fire Test of Door Assemblies

This section contains listings of recognized components used in the construction of Warnock Hersey listed fire doors. These components consist of parts and materials that have been evaluated for use in specific fire door designs and are under the Intertek-Warnock Hersey follow-up inspection and verification program. For this listing in particular, these components include the adhesives noted above.