Product Covered:
Cosentino Industrial, S.A.U. - DEKTON PROTEK Panels
Product Description:
DEKTON PROTEK slabs are the result of high-temperature sintering (between 1100 - 1230 °C) of various heavily compacted minerals in different proportions depending on the product, which include mainly aluminosilicates (clays, kaolins, feldspars), silica (amorphous and crystalline), zircon (depending on the product), small amounts of inorganic or organic additives, as well as inorganic pigments.
Each DEKTON PROTEK slab has a fiberglass mesh adhered to the backside for reinforcement. DEKTON PROTEK slabs are available in a wide range of colors and in thicknesses ranging from 4 to 30 mm (
Note: only thicknesses between 12 mm and 30 mm are permitted for compliance with NFPA 285, as per UFF/CWP 30-01 Design Listing).
| Test Standard |
Rating |
Design Number |
| NFPA 285 |
Meets the conditions of acceptance |
UFF/CWP 30-01 |
| ASTM D1929 |
Flash Ignition Temperature (FIT) - 540 ºC
Self Ignition Temperature (SIT) - 540 ºC |
N/A |
| BS EN 13501-1 |
A2-s1, d0* |
N/A |
* This classification is valid for the following parameters:
The obtained results are valid for air-gaps behind the panels, with or without horizontal and vertical joints of 10mm, and for all substrates of Class A1 or A2-s1,d0.
