Forte 20 Minute Transom Panel Assembly
Company: Forte Opening Solutions
Wood Core Type (Particleboard or Stave Core, or LSL), Swinging flush door for installation in up to 20 minute, without hose stream locations. For use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in accordance with the frame manufacturer's individual listing. A field-applied edge seal system is required. Please refer to the individual manufacturer's Category G listing for limitations.
Limitations
Mortise or Cylindrical Latches with maximum 5” backset/Surface-Mounted Vertical Rod fire exit devices/Rim-Type fire exit devices/Concealed Vertical Rod exit devices/Deadbolts/Spring Bolts/Surface-Mounted Closers/Concealed Closer Arms/Edge-Guards/Surface-Mounted Protection Plates/Plant-Ons/Viewer/Pocket Pivot Hinges/Open-Back Strikes/ Louver/Electric Raceway/Vision Light Kit – Maximum 1296 sq. in./Surface-Mounted or Mortised Door Bottoms/Metal Edge with Astragal
* See manufacturer’s installation instructions for additional information on Smoke and Draft Control, size restrictions, and limitations.
Maximum Size of Openings
Maximum Width
4'-0"
Maximum Height of Opening
9’4” (9’0” for 1-LD-1 Core)
Maximum Height of Transom
4'-0"
Evaluated to the following...
This category includes doors evaluated without an edge-sealing system between the door and frame. It also includes doors evaluated with a sealing system incorporated (concealed or visible) into the edge of the door by the licensed manufacturer or machining distributor.
Meeting edges of pairs may require an astragal or an edge-sealing system. Please refer to individual door listings.
These doors are eligible for use in any "Category C - Standard" frame. These doors may also be installed in frames listed in "Category C - Proprietary" in the accordance with the frame manufacturer's individual listing.
All doors listed in Category A are eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
All doors in this category are identified by a label or marking bearing the wording, "Listed Fire Door", a time interval, a temperature rise rating, a serial number and the Warnock Hersey Certification Mark and "UL 10C".
